Table of Contents
Advertisement
Hybrid Parity (Super) Inverter
INSTALLER MANUAL
3.6kW/5.5kW/8.8kW PLUS PARALLEL VERSION
SUNSYNK-8K-SG01LP1 SUNSYNK-5K-SG03LP1 SUNSYNK-8K-SG02LP1 SUNSYNK-7.6K-
SG02LP1 SUNSYNK-6K-SG02LP1 SUNSYNK-5K-SG02LP1 SUNSYNK-3.6K-SG02LP1
Global Tech China Ltd, 3 Floor, Wai Yip Industrial Building.171 Wai Yip Street,
Kwun Tong, Kowloon, Hong Kong.
Tel: +852 2884 4318 Fax: +8522884 4816
www.sunsynk.com / sales@globaltech-china.com / www.globaltechhk.com
Version 3.0 (08/06/2020)
Advertisement
Table of Contents
Related Manuals for SunSynk 8K-SG01LP1
Summarization of Contents
SAFETY
General Safety Warnings
Crucial safety warnings including fire/electrocution risks and proper installation procedures.
SYSTEM OVERVIEW
Interactive Features
Highlights interactive features like easy display, monitoring, and power flow visualization.
Compatibility
Lists compatibility with grid voltages, generators, wind turbines, and grid-tied/off-grid modes.
Configurability
Details programmable controller, supply priority, operation modes, and battery charging.
TECHNICAL SPECIFICATIONS
3.6kW and 5.5kW Models
Technical specifications for 3.6kW and 5.5kW models, including battery, PV, and AC data.
5kW to 8.8kW Models
Technical specifications for 5kW, 6kW, 7.6kW, and 8.8kW models, covering battery, PV, and AC.
System Diagram
Provides a circuit block diagram and efficiency curve for the inverter system.
INSTALLATION
Selecting the Mounting Area
Details areas where the inverter should NOT be installed due to environmental factors.
Mounting the Inverter
Provides guidelines for selecting installation locations and ensuring proper mounting and clearance.
Battery Connection
Shows battery connection diagrams for 3.6/5.5kW and 8kW models.
Connecting a Lithium Battery
Steps for connecting a lithium battery, including surge protector and communication cable.
OPERATION
Display Overview
Explains the inverter's display interface, LED indicators, and function key operations.
Switching ON/OFF
Instructions for turning the inverter system on and off.
Home Page Navigation
Describes the home page display and its interactive elements.
Status Page Details
Details the information displayed on the status page, including power, voltage, and current.
SETTINGS
Setup Page Access
Overview of the setup page and its access to various settings menus.
Setting Time and Date
Guide on how to adjust the inverter's time and date settings.
Customizing Display Settings
Instructions for setting company name, beeper status, and auto dim feature.
Factory Reset and Lock Code
Procedures for factory reset, system self-check, and setting lock codes.
BATTERY MANAGEMENT
Battery Setup Home Page
Details on setting up battery type, capacity, charge, and discharge parameters.
Battery Protection and Charging
Important notes on protecting the battery and inverter, including charge/discharge limits.
Battery Discharge Settings
Configuration for inverter shutdown and low battery warnings based on voltage.
Setting Up Lithium Batteries
Steps for configuring lithium batteries, including communication protocol selection.
ADVANCED SETTINGS
Programming Charge/Discharge Times
How to program charge/discharge times and set export limits (Zero Export, Solar Export).
Grid Supply Voltage and Frequency
Settings for grid type, frequency, voltage limits, and power factor for grid connection.
Paralleling Inverter Settings
Configuration for master/slave setup, Modbus SN, and phase settings for paralleling.
Solar Power Generated Monitoring
How to access and view daily, monthly, yearly, and total solar power generation data.
SYSTEM MONITORING AND CONTROL
Grid Power Export/Consumption
How to access and view daily, monthly, yearly, and total grid power export/consumption.
Wind Turbine Settings
Settings for configuring MPPTs to be used as wind turbine inputs.
Auxiliary Load Settings
Configuration for generator input, auxiliary load, peak shaving, and micro inverter setup.
Peak Power Shaving Settings
Setting up generator/grid peak shaving and power shaving values to reduce demand charges.
TROUBLESHOOTING
Fault Codes Overview
How to check fault codes and a table of common error codes and their solutions.
Specific Fault Code Details
Details specific fault codes related to insulation, bus bars, grid issues, and battery voltage.
COMMISSIONING
Startup and Shutdown Procedure
Step-by-step guide for safely powering up and shutting down the inverter system.
Commissioning Information Checklist
Checks required for Solar, Grid, Battery, System Mode, Advance, and Fault Codes during commissioning.
SYSTEM MAINTENANCE
GFDI Fault Explanation
Explains the GFDI fault detection related to PV impedance and grid connection.
APPENDICES
RJ45 Port Pin Definitions
Pin definitions for RJ45 ports used for RS485 and CAN communication.
Australian Standards Note
Note on inverters sold in Australia being set to default Australian standards.
SolarMan App Compatibility
Compatibility of the Sunsynk inverter with the SolarMan app via WiFi or GSM data logger.
Use of RCDs
Recommendation for using Residual Current Devices (RCDs) for protection.
CONTACT INFORMATION
Australia Main Dealer Contact
Contact details for the main dealer in Australia.
Manufacturer Contact Information
Contact details for the manufacturer, Sunsynk Limited.
Need help?
Do you have a question about the 8K-SG01LP1 and is the answer not in the manual?
Questions and answers