Qos Tab - Diffserv Port Binding - Linksys MGBLH1 - Gigabit LH Mini-GBIC SFP Transceiver User Manual

• Rate (kbps)—Rate in kilobits per second. (Range: 1-100000 kbps or maximum port
speed, whichever is lower)
• Burst (byte)—Burst in bytes. (Range: 64-1522)
• Exceed Action—Specifies whether to drop the traffic that exceeds the specified rate or
burst or to reduce the DSCP service level.
• Set—Decreases DSCP priority for non-conforming traffic. (Range: 0-63).
• Drop—Drops non-conforming traffic.
Add—Adds the specified criteria to the policy map.
Remove—Deletes a class from a policy.
Add classes to a selected policy and set the Action, Meter, Rate, Burst and Exceed values using
the drop-down lists and fields provided then click Add.

QoS Tab - Diffserv Port Binding

This function binds a policy map to the ingress queue of a particular interface. You must first
define a class map and set an ACL mask to match the criteria defined in the class map. Then
define a policy map. Finally bind the service policy to the required interface. You can bind only
one policy map to an interface. The current firmware does not allow you to bind a policy map
to an egress queue.
Select Policy Map for a port from the drop-down list.
SRW2024P User Guide
Using the web-based Utility for Configuration
QoS Tab - Diffserv Port Binding
83