Admin Tab - User Authentication - Linksys MGBLH1 - Gigabit LH Mini-GBIC SFP Transceiver User Manual

Using the web-based Utility for Configuration

Admin Tab - User Authentication

Admin Tab - User Authentication
The switch supports up to five user names and passwords for management access (console and
web interfaces). The default user name is "admin" with no password. You should therefore
assign a new password for the "admin" user account and store it in a safe place. The default
"admin" account cannot be deleted from the system.
As well as the default "admin" account, up to five other user-defined accounts can be created
on the switch. To create a new user account, enter a user name and password up to eight
characters long, confirm the password, and then click Add.
To change the password for a specific user, select the user name from the list, enter the new
password, confirm the password by entering it again, and then click Update.
User Name—Displays the user name.
Password—Specifies the new password. The password is not displayed. As each character is
entered an asterisk (*) appears in the field. (Range: 1-159 characters)
Confirm Password—Confirms the new password. The password entered into this field must
match the password entered in the Password field.
The Add button adds the user configuration to the table. The Remove button removes a user
configuration from the table.
Authentication Type—Defines the user authentication methods. Combinations of all the
authentication methods can be selected. The possible field values are:
SRW2024P User Guide 109