Security Tab - Acl Binding - Linksys MGBLH1 - Gigabit LH Mini-GBIC SFP Transceiver User Manual

Using the web-based Utility for Configuration

Security Tab - ACL Binding

Security Tab - ACL Binding
After configuring Access Control Lists (ACL), you should bind them to the ports that need to
filter traffic. You can assign one IP or MAC access list to any port.
You must configure a mask for an ACL rule before you can bind it to a port.
This switch supports ACLs only for ingress filtering. You can only bind one IP or one MAC ACL to
any port, for ingress filtering.
Check the Enable box for the port you want to bind to an ACL. Select the required ACL from the
drop-down list.
Port—Fixed port or SFP module. (Range: 1-24).
IP (Input)—Specifies the IP Access List to enable for a port.
MAC (Input)—Specifies the MAC Access List to enable globally.
Click Save Settings to save the changes.
SRW2024P User Guide 63