Uplinking The Switch - Linksys MGBLH1 - Gigabit LH Mini-GBIC SFP Transceiver User Manual
24-port 10/100/1000 gigabit switch with webview and poe user guide
Hide thumbs
Also See for MGBLH1 - Gigabit LH Mini-GBIC SFP Transceiver:
- User manual (13 pages) ,
- User manual (169 pages) ,
- User manual (72 pages)
Table of Contents
Advertisement
Uplinking the Switch
To uplink the switch, connect one end of a Category 5 (or better) Ethernet network cable into
one of the 24 gigabit ports, and then connect the other end of the cable into the peripheral
device's uplink port. MDI/MDIX will automatically detect the speed and cable type.
If you will use the switch's console interface to configure the switch, proceed to
the Console Interface for Configuration"
If you will use the switch's web-based utility to configure the switch, proceed to
the web-based Utility for Configuration"
SRW2024P User Guide
Connecting the Switch
for directions.
for directions.
Uplinking the Switch
Chapter 5, "Using
Chapter 6, "Using
10
Advertisement
Table of Contents
