Using the web-based Utility for Configuration
Port Management Tab - LACP
Create—To create a new LAG, click the Create button in the Create column, then add members
to the LAG by clicking on the Select Member button. The Select Member screen for the Link
Aggregation opens.
Detail—To configure the LAG and the LAG broadcast control, click the Detail button. The detail
screen for the LAG opens. Assign up to 8 ports to the LAG by selecting the ports, then click
Apply.
Port Management Tab - LACP
Ports can be statically grouped into an aggregate link (that is, LAG) to increase the bandwidth
of a network connection or to ensure fault recovery. Or you can use the Link Aggregation
Control Protocol (LACP) to automatically negotiate a LAG link between the switch and another
network device. For static LAGs, the switches have to comply with the Cisco EtherChannel
standard. For dynamic LAGs, the switches have to comply with LACP. This switch supports up to
SRW2024P User Guide
39