Linksys MGBLH1 - Gigabit LH Mini-GBIC SFP Transceiver User Manual page 133

file send window displays the progress of the download procedure. Note: The download file
must be a valid binary software file from Linksys for the target switch.
8. After the file has been downloaded, you are prompted with Update Image File: to specify the
type of code file. Press R for runtime code, D for diagnostic code, or, L for loader code.
Caution: If you select <L> for loader code, be sure the file is a valid loader code file for the
switch. If you download an invalid file, the switch will not be able to boot. Unless absolutely
necessary, do not attempt to download loader code files. Press Send and the software is
downloaded.
9. Specify a name for the downloaded code file. File names are case-sensitive, should be from
1 to 31 characters, not contain slashes (\ or /), and the leading letter of the file name should
not be a period (.). (Valid characters: A-Z, a-z, 0-9, ". " , "-", "_")
SRW2024P User Guide
Startup Menu Procedures
127