Linksys MGBLH1 - Gigabit LH Mini-GBIC SFP Transceiver User Manual page 55

Using the web-based Utility for Configuration
Statistics Tab - RMON Statistics
Received Bytes (Octets)—Displays the number of octets received on the interface since the
device was last refreshed. This number includes bad packets and FCS octets, but excludes
framing bits.
Received Packets—Displays the number of packets received on the interface, including bad
packets, multicast and broadcast packets, since the device was last refreshed.
Broadcast Packets Received—Displays the number of good broadcast packets received on
the interface since the device was last refreshed. This number does not include Multicast
packets.
Multicast Packets Received—Displays the number of good Multicast packets received on the
interface since the device was last refreshed.
CRC & Align Errors—Displays the number of CRC and Align errors that have occurred on the
interface since the device was last refreshed.
Undersize Packets—Displays the number of undersized packets (less than 64 octets) received
on the interface since the device was last refreshed.
Oversize Packets—Displays the number of oversized packets (over 1518 octets) received on
the interface since the device was last refreshed.
Fragments—Displays the number of fragments (packets with less than 64 octets, excluding
framing bits, but including FCS octets) received on the interface since the device was last
refreshed.
Jabbers—Displays the total number of received packets that were longer than 1518 octets.
This number excludes frame bits, but includes FCS octets that had either a bad Frame Check
Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral
octet (Alignment Error) number. The field range to detect jabbers is between 20 ms and 150 ms.
Collisions—Displays the number of collisions received on the interface since the device was
last refreshed.
Frames of xx Bytes—Number of xx-byte frames received on the interface since the device was
last refreshed.
Clear Counters—This option will reset all of the statistic counts.
Refresh Now—Use this option to refresh the statistics.
SRW2024P User Guide 49