Admin Tab - Cable Test - Linksys MGBLH1 - Gigabit LH Mini-GBIC SFP Transceiver User Manual

Type—Indicates the port mode configuration for port mirroring. The possible field values are:
• Receive—Defines the port mirroring on receiving ports. This is the default value.
• Transmit—Defines the port mirroring on transmitting ports.
• Both—Defines the port mirroring on both receiving and transmitting ports.
Target Port—Defines the port from which traffic is mirrored.
Specify the source port, the traffic type to be mirrored, and the target port, then click Add. The
mirror session is displayed in the text box.

Admin Tab - Cable Test

To test the connection quality of an attached cable, click on the Test button for the port. Note
that the cable needs to be connected at both ends; otherwise the test will fail.
Port—This is the port to which the cable is connected.
Test Result—This is the test result. OK indicates that the cable passed the test. No Cable means
there is no cable connected to the port. Open Cable means the cable is connected on only one
side. Short Cable indicates that a short has occurred in the cable. Undefined indicates that the
test could not be properly performed.
Cable Fault Distance—This is the distance from the port at which the cable error occurred.
Last Update—This is the last time the port was tested.
Test—Click the Test button to perform the test.
SRW2024P User Guide
Using the web-based Utility for Configuration
Admin Tab - Cable Test
116