Port Management > Lacp; Port Management > Poe Power Settings - Linksys SRW208 User Manual

Chapter 5
Indicates if the LAG is currently
Current Status
operating.
Reactivate Suspended LAG
LAG has been disabled as a result of a port lock or ACL
operation.
Admin Auto Negotiation
Negotiation on the LAG. Auto-negotiation is a protocol
between two link partners that enables a LAG to advertise
its transmission rate, duplex mode and flow control (the
flow control default is disabled) abilities to its partner.
Current Auto Negotiation
setting.
The configured speed at which the LAG is
Admin Speed
operating.
The current speed at which the LAG
Current LAG Speed
is operating.
Enables or disables flow control or
Admin Flow Control
enables the auto negotiation of flow control on the LAG.
The user-designated Flow Control
Current Flow Control
setting.
Displays the PVE group to which the LAG is
PVE
configured.
Select Ports
Displays the ports that are members of the selected
Ports
LAG.
Port Management > LACP
Aggregate ports can be linked into link-aggregation port
groups. Each group is comprised of ports with the same
speed, set to full-duplex operation.
Aggregated Links can be manually setup or automatically
established by enabling Link Aggregation Control
Protocol (LACP) on the relevant links. Aggregate ports can
be linked into link-aggregation port-groups. Each group is
comprised of ports with the same speed. The LACP screen
contains fields for configuring LACP LAGs.
8-Port 10/100 Ethernet Switch with Webview
Reactivates a LAG if the
Enables or disables Auto
The current Auto Negotiation
Advanced Configuration
Port Management > LACP
LACP System Priority (1-65535)
LACP priority value. The possible range is 1- 65535. The
default value is 1.
Defines the port number to which timeout and
Port
priority values are assigned.
Defines the LACP priority value for
LACP Port Priority
the port. The field range is 1-65535.
Administrative LACP timeout. A short or
LACP Timeout
Long timeout value can be selected. Long is the default.
A channel will only be formed between ports
Admin Key
having the same admin key. This only applies to ports
located on the same switch.
Port Management > PoE Power Settings
Port Management > PoE Power Settings
Displays the selected port's number.
Port
Indicates the global
23