Table of Contents
Advertisement
Thermo Control & Thermo Mix
User Manual
H100-Pro
Thermo Control
HC110-Pro
HM100-Pro
Thermo Mix
HCM100-Pro
Please read the User Manual carefully before use, and follow all operating
and safety instructions!
We cannot be responsible to inform at real-time if the outline and
specifications are subject to change for improvement.
12301086
Ver.20191025
Advertisement
Table of Contents
Related Manuals for DLab Thermo Control HC110-Pro
Summarization of Contents
Preface and User Information
Service Contact Information
Details on how to contact the manufacturer's service department for technical support and required information.
Warranty Terms and Conditions
Explanation of the instrument's warranty coverage, limitations, and conditions for claims.
Safety Instructions
General Operating Warnings
Read instructions carefully and ensure only trained staff operate the instrument.
Burn Hazard Precautions
Caution regarding hot surfaces and residual heat after operation.
Electrical Safety
Ensure proper grounding of the power socket and voltage match.
Personal Safety Measures
Wear safety guards, avoid hazards from liquids/gases, ensure stable setup.
Hazard Awareness and Handling
Be aware of media hazards, process pathogenic materials safely, check components.
Instrument Limitations
Guidelines on power connection, cable placement, and expert maintenance.
Proper Use and Inspection
Intended Application
Designed for heating liquids in educational and laboratory settings.
Installation Clearance
Observe minimum recommended distances between the device and surrounding objects.
Receiving Inspection
Unpack and check for transport damage; contact support if issues found.
Included Items
List of items provided with the instrument, including the main unit and accessories.
Control and Display Overview
Control Panel Elements
Overview of the LCD screen, function buttons, and adjustable knob.
Device Interfaces and Power
Identification of power switch, power interface, and RS 232 interface.
Display Readouts
Explanation of 'Set' and 'Actual' parameter displays on the LCD screen.
Button Functions
Details on the functions of Prog, Temp, Time, and the Adjustable knob.
Operation Guide
Parameter Setting
Step-by-step guide on setting temperature, speed, and time parameters.
Starting and Stopping
Instructions for starting, pausing, resuming, and stopping instrument operation.
Running Modes
Details on single step, multiple step, and continuous working modes.
Program Management
Procedures for saving, loading, and managing programmed sequences.
Individual Function Operation
Operating the device using specific functions like temperature or mixing only.
Temperature Calibration
Procedure for calibrating the instrument's temperature control for accuracy.
System Management and Testing
Factory Settings Restore
Steps to reset the instrument to its original factory default settings.
Trial Run Procedure
Steps for performing a trial run to ensure correct device operation.
Faults, Maintenance, and Standards
Troubleshooting Common Faults
Guidance on identifying and resolving common instrument issues like power failures.
Cleaning and Maintenance
Instructions on proper cleaning methods, recommended cleansers, and maintenance.
Storage Recommendations
Guidelines for storing the instrument in a dry, clean, and stable location.
Compliance Standards
Lists safety, EMC standards, and EU guidelines the instrument adheres to.
Technical Specifications
Model and Functionality
Detailed technical specifications for different models, including heating and cooling functions.
Performance Characteristics
Information on temperature range, speed, control accuracy, uniformity, and power.
Need help?
Do you have a question about the Thermo Control HC110-Pro and is the answer not in the manual?
Questions and answers