Related Manuals for Armstrong 4380 Series
Summarization of Contents
Introduction and Safety Information
Document Introduction
Provides specific information for safe installation, operation, and maintenance of Vertical In-Line pumps.
Safe Use Instructions
Emphasizes study and understanding of the document before installation and use by trained personnel.
Temperature, Noise, and Storage
Discusses temperature limits, noise level references, and storage guidelines.
Installation Procedures
Uncrating, Handling, and Lifting
Instructions for inspecting the pump, safe handling, and lifting methods.
Installation Location and Principles
Guidance on pump location and key principles for pipe-mounting.
Installation Arrangements and Guidelines
Installation Arrangements
Covers standard, specialized, and prohibited installation methods.
Important Operational Warning
Warning against running the pump at very low flow or with a closed discharge valve.
Pump Piping Guidelines
Consolidated guidelines for pump piping, including bends, strain, and flange alignment.
Piping, Alignment, Operation, and Troubleshooting
Piping Details and Alignment
Covers piping specifics, discharge valve caution, and alignment procedures.
Pump Operation and Starting
Step-by-step instructions for safely starting the pump.
Troubleshooting and Precautions
Covers noise/vibration issues, star-delta starters, and operational warnings.
General Care and Maintenance
Routine Care and Safety
Covers unit cleanliness, operating temperature limits, service safety, and mechanical seal accessories.
Lubrication Information
Details pump/motor lubrication needs and cautions for seal elastomer and TDS levels.
Mechanical Seal Details
Explains seal flushing, operation, seating, and lists replacement documentation.
System Cleanliness, Warranty, and Layouts
System Cleanliness and Checks
Emphasizes system cleaning, flushing, and pre-operation checks for proper operation.
Warranty Information
States warranty does not cover damages from failure to observe precautions.
Common Installation Layouts
Illustrates hanger, ceiling, minimum footprint, and additional pipe support arrangements.
Installation Layout Diagrams (continued)
Floor, Stanchion, and Specialized Layouts
Diagrams for floor saddle, stanchion, seismic, horizontal, and grooved system installations.
Installation Layout Diagrams (continued)
Prohibited Installation Methods
Diagrams showing prohibited lifting and rigid base mounting without isolation.
Series 4300 Tapped Collection Well
Shows the tapped collection well on Series 4300 pumps for draining leaks or condensate.
Appendix 1
Declaration of Conformity and Standards
Lists product conformity declarations and applied industry standards.
Need help?
Do you have a question about the 4380 Series and is the answer not in the manual?
Questions and answers