Related Manuals for Hill-Rom P1840
Summarization of Contents
Document Symbols
Warning and Caution Symbols
Explains warning and caution symbols for safety and equipment protection.
Hazard Warning Symbols
Details specific hazard warning symbols including caught, chemical, and electrical shock hazards.
Intended Use and Introduction
Intended Use Overview
Describes the healthcare environments and patient populations for the TotalCare® bed.
Manual Introduction
Provides information for normal operation and safety adherence for the user manual.
Bed Features and Controls
Patient Characteristics and Weight Limits
Details patient weight capacity and safe working load limits for the bed models.
Caregiver Siderail Controls
Explains the point-of-care siderail controls for bed articulation and system functions.
Lockout and Height Controls
Covers lockout functions to prevent unauthorized articulation and bed height adjustments.
Head, Knee, and Foot Section Articulation
Details controls for adjusting the head, knee, and foot sections of the bed.
Trendelenburg and Tilt Table Functions
Explains Trendelenburg, Reverse Trendelenburg, and Preliminary Tilt Table features.
Safety and Information Indicators
Details visual and audio indicators for bed status, alarms, and system functions.
Chair Positioning
Describes the FullChair® mechanism for chair, egress, and recliner patient positions.
Nurse Call and Brake/Steer Systems
Covers the Nurse Call system and the Point-of-Care® Brake and Steer System functionality.
Emergency Caregiver Controls
Details HandsFree® emergency Trendelenburg and CPR release mechanisms.
SideCom® Communication System
Explains the SideCom® system and the operation of head and intermediate siderails.
Bed Components: Headboard and Footboard
Describes the removal and installation of the headboard and footboard.
Graphical Caregiver Interface (GCI)® Control
Explains the GCI touch screen interface for operating bed functions and viewing data.
Bed Exit Alarm System
Covers activation, deactivation, and configuration of the bed exit alarm.
Scale Functions and Operation
Details how to use the bed scale for weighing, zeroing, and managing weight history.
Head Angle Alarm
Explains setting and managing head angle and head of bed reminder alarms.
NaviCare® System Integration
Describes the NaviCare® system connection and alert management for the bed.
Mattress Modes and Therapies
Details Pressure Redistribution Surface, Rotational Therapy, and Percussion/Vibration.
OPTI-REST and Patient History
Explains the OPTI-REST mode and how to view and clear patient history data.
Turn Assist and Siderail Controls
Covers Turn Assist modes and additional siderail controls for pressure redistribution surfaces.
Alarm Pause and Surface Functions
Explains alarm pausing and specific surface functions like Seat Deflate.
Safety Tips and Precautions
Bed Positioning and Brake Safety
Emphasizes safe bed positioning when unattended and proper brake engagement.
Fluid Spills and Cleaning Safety
Warns about hazards from fluid spills and emphasizes safe cleaning procedures.
Siderail and Restraint Safety
Discusses safe use of siderails, patient monitoring, and restraint device application.
Electrical and Transport Safety
Covers electrical safety, risks of flammable anesthetics, and safe transport procedures.
Sleep Surface, Flammability, and Articulation Safety
Addresses mattress safety, fire prevention, safe bed articulations, and chair positioning.
Patient Helper and Positioning Safety
Provides safety guidance for the Patient Helper (trapeze) and patient positioning.
Maintenance and Cleaning Procedures
Preventive Maintenance Schedule
Outlines required bi-annual and annual preventive maintenance tasks for the bed system.
Battery Maintenance
Details conditions for replacing main and IntelliDrive® transport system batteries.
General Cleaning and Disinfecting
Provides instructions for general cleaning, steam cleaning, and disinfecting the bed.
Sleep Surface and Coverlet Cleaning
Explains procedures for cleaning the sleep surface, removing it, and sanitizing the coverlet.
Technical Specifications
Product Identification and Dimensions
Lists product numbers and detailed physical dimensions of the bed system.
Environmental and Power Specifications
Details operating conditions, transport environmental data, and mains power requirements.
Fuse and Outlet Specifications
Lists fuse types and specifications for the auxiliary AC receptacle option.
Classification and Standards Compliance
Outlines the equipment classifications and standards the bed system conforms to.
Electromagnetic Compatibility (EMC) Guidance
Provides guidance on electromagnetic emissions and immunity for the bed system.
Need help?
Do you have a question about the P1840 and is the answer not in the manual?
Questions and answers