● Port Range: Select the port range.
Add: Click to add the rule profile to the table at the bottom of the screen.
Update: Click to update information for the rule if the user has selected a listed item and has
made changes.
Delete: Select a listed item and click "Delete" to remove the item from the list.
Clear: Click to erase all fields and enter new information.
Priority Up: Select a rule from the list and click "Priority Up" to increase the priority of the
rule.
Priority Down: Select a rule from the list and click "Priority Down" to decrease the priority
of the rule.
Update Priority: After increasing or decreasing the priority of a rule, click "Update Priority"
to save the changes.
System Setting
This system setting enables users to change password, set the device time, view the device
information, restart the system, save and load different settings as profiles, restore factory
default settings, upgrade the firmware, and ping remote IP addresses....etc.
Password
This function enables users to set administrative and user passwords. These passwords are used
to gain access to the WLAN Router interface.
Figure 62
57