Encore ENH924-AUT Specifications

24-port fast ethernet switch

Hide thumbs Also See for ENH924-AUT:

See also: User Manual

ENH924-AUT

24-Port Fast Ethernet Switch

The ENCORE ENH924-AUT 24-Port Fast Ethernet Switch is a powerful, high-performance

Fast Ethernet switch, with all 24 ports capable of 10 or 100Mbps auto-negotiation operation

(NWay), which means the switch could automatically negotiate with the connected partners

on the network speed and duplex mode. It is ideal for micro-segmenting large networks into

smaller, connected subnets for improved performance, enabling the bandwidth demanding

multimedia and imaging applications. Moreover, the 10/100Mbps auto-sensing ability

provides an easy way to migrate 10Mbps to 100Mbps network with no pain. Compared to

the shared 10Mbps or 100Mbps networks, the switch delivers a dedicated 10/100Mbps

connection to every attached client with no bandwidth congestion issue. This switch also

supports auto MDI / MDI-X function. Each port could be used to connect to another switch or

hub with no crossover RJ-45 cable.

Store-and-forward switching mode promises the low latency plus eliminates all the network

errors, including runt and CRC error packets. To work under full-duplex mode, transmission

and reception of the frames can occur simultaneously without causing collisions as well as

double the network bandwidth.

Table of Contents

Need help?

Do you have a question about the ENH924-AUT and is the answer not in the manual?

Page 1 ENH924-AUT 24-Port Fast Ethernet Switch The ENCORE ENH924-AUT 24-Port Fast Ethernet Switch is a powerful, high-performance Fast Ethernet switch, with all 24 ports capable of 10 or 100Mbps auto-negotiation operation (NWay), which means the switch could automatically negotiate with the connected partners on the network speed and duplex mode.
Page 2: Features And Benefits
The switch is plug-n-play without any software to configure and also fully compliant with all kinds of network protocols. Moreover, the rich diagnostic LEDs on the front-panel can provide the operating status of individual port and whole system. Features and Benefits Complies with 10BASE-T specifications of the IEEE802.3 standard Complies with 100BASE-TX specifications of the IEEE802.3u standard Supports NWAY protocol for speed (10/100Mbps) and duplex mode (Half/Full)
Page 3: Package Contents
Package Contents One 24-Port Fast Ethernet Switch One power cord User’s manual Rack-mount brackets and screws (optional) ※ The specifications and picture are subject to change without prior notice! Please refer to the directions in product package...