Comfort Glow CCL3018P Owner's Operation And Installation Manual page 17

INSTALLATION
Continued
5.
For CCL3924PT and CCL3930PTA Only:
on the bottom of crossover log (#5). Slide the pin into the hole
located in crossover log (#4). Slide the hole onto the pin on
front log (#1). See Figure 32.
For CCL3018P and CCL3018PT Only:
tom of crossover log (#5). Slide the holes over the left pins on
middle log (#2) and front log (#1). See Figure 33.
6. Locate holes on the bottom of crossover log (#6). Slide these
holes onto the right pins located in middle log (#2) and front
log (#1). See Figure 34.
7. For CCL3930PTA only:
over log (#7). Slide onto the pins located in crossover log (#6)
and middle log (#2). See Figure 35.
8. Add lava rock around base of heater if desired. Do not place
any lava rock on logs or burner.
Front Log (#1)
Figure 32 - Installing Crossover Log (#5)
(CCL3930PTA Shown)
Front Log (#1)
Figure 33 - Installing Crossover Log (#5)
(CCL3018P and CCL3018PT Only)
For more information, visit www.desatech.com
For more information, visit www.desatech.com
107124-01E
Locate pin and hole
Locate holes on the bot-
Locate holes on the bottom of cross-
Crossover Log (#4)
Crossover
Log (#4)
Figure 34 - Installing Crossover Log (#6)
(CCL3930PTA Shown)
Holes
Pins
Figure 35 - Installing Crossover Log (#7)
(Model CCL3930PTA Only)
INSTALLATION
Installing Logs (Cont.)
Pins
Log #2
Front Log (#1)
Crossover
Log (#6)
Middle
Log (#2)
17
17