EdilKamin KIRA H 22 Installation, Use And Maintenance Manual

EdilKamin KIRA H 22 Installation, Use And Maintenance Manual

Pellet boiler stove

Advertisement

KIRA H 18-22
VYDA H 18-22
PELLET BOILER STOVE
EN
Installation, use and maintenance
page
2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KIRA H 22 and is the answer not in the manual?

Questions and answers

Summarization of Contents

Technical Data
Electrical Specifications
Details electrical power, absorbed power, and protection rating.
Installation
Checking the suitability of the installation space
Requirements for room volume, floor load capacity, and ventilation for safe installation.
Protection from heat and safety clearances
Specifies minimum distances from flammable materials and building surfaces.
Introduction About Use
Fuel
Specifies approved fuel types, dimensions, and humidity for safe operation.
Loading the Pellets into the Tank
Instructions for safely adding pellets to the stove's tank.
Display
Interface
Description of the pop-up display panel and its operation.
Description of the Display
Buttons
Explanation of the function of each button on the display interface.
Remote Control Power Saving
How the display back-lighting and screen turn off to save power.
Operational Logic
Off Mode
Details the disabled state, heat production, and display information when the product is off.
On Mode
On Without Heating Demands (Stand By Off)
Shows the display when the product is active but not actively heating.
On With Heating Demand
Shows the display when the product is active and heating is requested.
On Mode With Stand By
Stand By
Displays product mode, time, room temperature, and timer status when in standby.
Commands and Menu
Accessing the Menus
Guide to navigating the main menu to access various settings and functions.
Stand By Menu
Stand By Operation
Details how the standby function operates, including activation and duration settings.
Crono Menu
Crono - Program
Setting temperature setpoints and time zones for automated heating schedules.
Setting the Temperature Levels "Temp"
How to adjust the three adjustable temperature setpoints (T1, T2, T3) for the Crono function.
Temperature Menu
Setting the Water Temperature
Instructions for setting boiler water temperature, accumulator temperature, or climatic curve.
Various Menus
Fan Setting ("Ventilation" on the Display)
Allows setting fan speed manually, automatically, or turning it off.
Language
Allows selection of the user interface language from available options.
Maintenance
Daily Maintenance
Step-by-step guide for essential daily cleaning tasks of the stove.
Troubleshooting
Shutdown Messages and Their Solutions
Lists error codes, their problems, and recommended solutions for automatic shutdowns.

Table of Contents