Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Magura Marta SL 180/180
Summary of Contents for Magura Marta SL 180/180
- Page 1 WORKSHOP 2011 DISC BRAKES...
- Page 2 Louise 180/180 Louise 160/160 Louise 160/160 Julie HP 203/203 Julie HP 203/203 Julie HP 180/180 Julie HP 180/180 Julie HP 160/160 Julie HP 160/160 Specifications subject to change wit- hout prior notice THE PASSION PEOPLE THE PASSION PEOPLE www.magura.com www.magura.com...
-
Page 3: Table Of Contents
Summary 1. Introduction 2. Safety instructions before the first ride 3. Safety instructions before every ride 4. Transport of the bicycle 5. Brake installation 6. Shortening the hose 10-11 7. Maintenance 12-13 8. Repairs 9. Bleeding and Filling 15-16 10. The disc brake wheel 11. -
Page 4: Introduction
Never touch either the rotor or the brake caliper after long braking as this may cause serious burns You will be pleased to find out that the MAGURA Marta disc brake offers a superior braking power even with little hand force applied, no matter what the weather conditions should be. -
Page 5: Safety Instructions Before The First Ride
2. Before the first ride 1. Are you already familiar with hydraulic disc brakes? Our brakes might be much more powerful than the stoppers on which you relied so far. Take your bicycle to a safe area to learn the proper braking technique and operation of your new brakes and your bike. -
Page 6: Transport Of The Bicycle
During transport in an aircraft you can leave your brake as it is, e.g. you do not have to empty it. THE PASSION PEOPLE www.magura.com... -
Page 7: Brake Installation
9. hose inserts (2 pieces) 10. olives (2 pieces) 11. Torx T25 key 12. Allen key 2 Specifications modifying and improving this product are subject to change without prior notice. The brake levers and calipers of the different MAGURA disc brake models are... - Page 8 Because of the large variety of forks and frames availa- ble on the market it is impossible for MAGURA to test all possible combinations. If you mount any of our brake systems always make sure that the brakes are in conformity with the bicycle.
- Page 9 3. Mounting on IS mounts: Mount the adaptor onto the fork or the frame. Use a 5 mm allen key. Please follow carefully the mounting instructions that come with the respective adaptor! If you use a thru-axle hub on the front you might have to use thicker 3 mm spacers (depending on fork model). These are available separately (code: 0720 829).
- Page 10 In such a case you should contact your dealer who can care to this with the MAGURA Gnann-o-mat disc optimizer for a totally even surface of the disc brake mounts. These are absolutely necessary for a drag free function of your brake.
-
Page 11: Shortening The Hose
Marta is a high-pressure system and comes with a reinforced hose, the „MAGURA Disc Tube“ which will show this label. The Disc Tube needs an additional insert for a proper fitting. Never mix and match either the hoses or other parts from the other MAGURA disc brake models. - Page 12 Squeeze the lever blade several times (pump) to push the pads to their proper position until the lever feel becomes very firm. If you cannot realize this, bleed the brake (see page 15 onwards). THE PASSION PEOPLE www.magura.com...
-
Page 13: Maintenance
Brake Oil: MAGURA disc brakes use as transmission medium low viscosity mineral oil, the biodegradable MAGURA ROYAL BLOOD. Contrary to DOT brake fluid the MAGURA ROYAL BLOOD does not irritate human skin or strip the paint of your frame. Moreover it does not absorb water like DOT and does not have to be changed regularly. - Page 14 If this happened by accident push back the pistons with mounted brake pads by using the transport device or a flat blade screwdriver. Use only genuine MAGURA brake pads! MAGURA cannot guarantee a correct function of the brake if you use brake pads from other manufacturers, which were not tested.
-
Page 15: Repairs
The Marta is a high-pressure system and comes with a reinforced hose, the „MAGURA Disc Tube“ wearing also this imprint. The Disc Tube needs an additional insert for a proper fitting. Never mix and match either the hoses or other parts from the other MAGURA disc brake models! Any misuse might cause serious accidents! 1. -
Page 16: Bleeding And Filling
15° upwards from the horizon- tal position. Slightly tighten the clamp screw in that position. 2. For filling and bleeding a MAGURA disc brake you will need the disc brake service kit including all necessary tools. - Page 17 Never contaminate brake pads with oil or grease this causing permanent loss of brake power! Contaminated pads are definitely killed and MUST be replaced! A contaminated rotor can be cleaned with MAGURA brake cleaner, warm dishwater or alcohol.
-
Page 18: The Disc Brake Wheel
Mount the quick release of the wheel on the opposite side of the caliper! Never use ultra lightweight quick releases with titanium or aluminum axles for your wheel sets in combination with a disc brake. You will not be in a position to rea- lize the necessary tightening torque! THE PASSION PEOPLE www.magura.com... -
Page 19: Trouble Shooting
(page 12) leaking hose or brake accident, incorrect installation change hose or defective brake lever or caliper (page You will find further tips on our website www.magura.com in the FAQ section!! Stay tuned. -
Page 20: Accessories
13. Warranty MAGURA is giving a 5-year leakproof warranty on brake levers (master cylinder) and brake calipers if you register your brake online on magura.com. Watch out for the red info sheet in the middle of this manual! This warranty is void when damage to the brake has occurred from... -
Page 21: Spare Parts Exploded View
14. Spare parts 2011/max. tightening torques 10x: 0722 532 0,4 Nm 10x: 0721 000, 0,6 Nm 0724 525 FR 10x: 0724 046 0724 042 black carbon lever blade 1x 0724 043 red 0724 040 0724 041 silver FR lever blade 1x 0724 524 Raceline 0724 534 10x: 0724 045... - Page 22 0724 517 right: 0724 518 Caliper with pads Marta SL Magnesium 0724 049 Marta SL (black) 0724 047 Marta SL (red) 0724 147 Marta (black) 0724 047 Marta SL Raceline 0724 531 Marta FR 0724 532 THE PASSION PEOPLE www.magura.com...
-
Page 23: Tuning Adaptors For Postmount Caliper
Should this not be the case, longer bolts, with a minimum hardness of 8.8 should be used and secured using blue Loctite. Specifications are subejct to change without prior notice Visit our website magura.com for further information, tech tips and free online help!! - Page 24 > SIE FINDEN UNSERE WELTWEITEN HANDELSPARTNER UND SERVICE CENTER AUF MAGURA.COM! > CHECK OUT OUR WORLDWIDE PARTNERS AND SERVICE CENTERS ON MAGURA.COM! Deutschland Asia MAGURA Bike Parts MAGURA Asia Limited Co. GmbH + Co. KG No. 160, Sec. 1, Chang-an Road...
Need help?
Do you have a question about the Marta SL 180/180 and is the answer not in the manual?
Questions and answers