Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for TFortis PSW-2G6F+
Summarization of Contents
Switch Management
Switch Management Interfaces
Overview of Web, Telnet, SNMP, and USB console management options.
Before Connecting to the Switch
Essential information and attention notes before establishing a connection.
Web Interface: Initial Connection
Guide for the first connection to the switch using its default IP address.
Web Interface: Network Settings
Configuring IP, subnet mask, gateway, DNS, and DHCP mode.
Web Interface: User Account Management
Creating and managing user accounts with admin or user privileges.
Web Interface: Port Settings
Configuring port state, speed, duplex, flow control, and SFP mode.
Web Interface: VLAN Configuration
Setting up 802.1q static VLANs and Port Based VLANs for network segmentation.
Web Interface: QoS Configuration
Prioritizing traffic and managing bandwidth for different applications.
Web Interface: STP/RSTP Configuration
Implementing STP and RSTP for network loop prevention and redundancy.
Web Interface: SNMP Configuration
Setting up SNMP for network monitoring and management.
Web Interface: MAC Address Filtering
Enhancing security by filtering MAC addresses on switch ports.
Web Interface: Camera Comfort Start
Configuring preheating for cameras to ensure comfortable starting conditions.
Web Interface: Camera Hanging Control
Configuring automatic restart for cameras that hang or lose connection.
Web Interface: Firmware Update
Procedures for updating the switch firmware via the web interface.
Web Interface: Save/Restore Settings
Backing up and restoring switch configuration files through the web interface.
Web Interface: Factory Reset
Guide on selectively or fully resetting the switch to factory defaults via web.
Management via Telnet
Telnet Management Interface
Using Telnet for remote command-line access and management.
Telnet Configuration Command Reference
Detailed commands for configuring network settings, ports, VLANs, SNMP, etc. via Telnet.
Telnet Show Command Reference
Commands to display switch status, configuration, and statistics.
Firmware Update via TFTP using Telnet
Step-by-step process for updating firmware using TFTP through Telnet.
Diagnostic Tools: Ping and Cable Tester
Using ping utility and cable tester for network troubleshooting.
Management via USB Console
USB Console Management Setup
Connecting and configuring the switch via USB console using a terminal emulator.
Need help?
Do you have a question about the PSW-2G6F+ and is the answer not in the manual?
Questions and answers