Advertisement
Operating Instructions
8450.810/15--EN
1.
Declaration of conformity
2.
Declaration of incorporation for Partly Completed machinery
3.
General
4.
Safety
5.
Transport and interim storage
6.
Description of valves
7.
Installation
8.
Commissioning / Decommissionning
9.
Maintenance / Repair
10. Trouble shooting
DANAÏS 150
DANAÏS MT II
DANAÏS TBT II
DANAÏS TBT AL
2
4
5
5
6
7
10
15
15
16
42 048 660
Advertisement
Table of Contents
Related Manuals for KSB DANAIS MT II
Summarization of Contents
Safety
Safety Symbols in Operating Instructions
Explains safety symbols used to indicate potential hazards to personnel and equipment.
Personnel Qualification and Training
Specifies the required qualifications and training for personnel involved in operation and maintenance.
Dangers of Non-Compliance with Safety Instructions
Details the severe risks to personnel, environment, and valve operation from ignoring safety guidelines.
Safety Instructions for User/Operator
Provides essential safety precautions for users operating the valve, including contact and hazard prevention.
Transport and Interim Storage
Transport Procedures
Guidelines for safe handling and transportation of valves to prevent damage.
Interim Storage Requirements
Instructions for proper storage of valves to maintain their operational integrity.
Description of Valves
Valve Marking
Details on the markings applied to valves according to PED requirements.
Drawings and Documents
References to sectional drawings and specific technical documentation for valve series.
List of Components
Comprehensive list of all valve parts with their corresponding part numbers.
Functioning Principle
Explanation of the valve's operational mechanism and its key design features.
Installation
General Installation Guidelines
Essential precautions and general requirements for the correct installation of valves.
Installation Conditions
Specific requirements for flange dimensions, gasket compatibility, and spacing.
Handling and Lifting Procedures
Safe methods for lifting, moving, and positioning valves during installation.
Installation Recommendations
Best practices for assembling valves between pipe flanges for optimal performance.
Commissioning and Decommissioning
Commissioning Procedures
Steps to follow for putting the valve into service, including checks and functional tests.
Decommissioning Procedures
Instructions for safely taking the valve out of service for shutdown or maintenance.
Maintenance and Repair
Maintenance Safety Instructions
Critical safety precautions for personnel performing maintenance and repair work.
Valve Removal and Actuator Disconnection
Step-by-step guide for safely removing the valve from the piping and its actuator.
Valve Disassembly and Re-assembly
Procedures for taking apart and reassembling the valve components.
Troubleshooting
General Troubleshooting Guidance
General recommendations for qualified personnel carrying out repair and service work.
Faults and Remedies
A guide listing common valve faults and their corresponding solutions or checks.
Need help?
Do you have a question about the DANAIS MT II and is the answer not in the manual?
Questions and answers