Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Burkert SE32
Summarization of Contents
About These Operating Instructions
Symbols Used
Explains symbols used in the manual for warnings and notes.
Definition of the Word "Device"
Clarifies the term "device" as referring to type 8032 or SE32.
Intended Use
Intended Use
Specifies the intended application for measuring liquid flow rates and limitations.
Basic Safety Information
Basic Safety Information
Outlines critical safety precautions related to pressure, temperature, electrical voltage, and fluid nature.
General Information
Manufacturer's Address and International Contacts
Provides contact details for the manufacturer and sales offices.
Warranty Conditions
States that warranty is governed by conforming use and operating conditions.
Information on the Internet
Directs users to the company website for operating instructions and data sheets.
Description
Construction of the SE32
Details the components and configurations of the SE32 flow transmitter/detector.
Construction of the 8032
Describes the 8032 flowmeter with its sensor-fitting (S030).
Construction of the SE32 with Sensor-fitting S077
Explains the SE32 when combined with the S077 sensor-fitting.
Description of the Rating Plate
Explains the information presented on the device's rating plate.
Technical Data
Technical Data of the SE32
Lists detailed technical specifications for the SE32, including conditions, standards, dimensions, material, and electrical data.
Technical Data of the 8032
Lists detailed technical specifications for the 8032, including conditions and standards.
Technical Data of the SE32 with S077 Sensor-fitting
Details technical specifications for the SE32 when used with the S077 sensor-fitting.
Installation and Wiring
Safety Information
Provides essential safety instructions for installation and wiring procedures.
Fluid Installation of the 8032
Guides the user through installing the 8032 into an S030 sensor-fitting.
Fluid Installation of the SE32 with an S077 Sensor-fitting
Details the process of installing the SE32 with an S077 sensor-fitting.
Wiring
Covers various wiring configurations for different device outputs and connectors.
Data of the Cables and Wires
Specifies cable types, connectors, and wire characteristics for device connections.
Assembling the Connectors
Provides step-by-step instructions for assembling device connectors.
Wiring a Version with Transistor Output and EN 175301-803 Male Fixed Connector
Details the wiring for transistor output using EN 175301-803 connectors.
Wiring a Version with 2 Transistor Outputs and a 5-pin M12 Male Fixed Connector
Explains wiring for devices with dual transistor outputs and M12 connectors.
Wiring of the Version with a Single Relay Output
Guides wiring for devices featuring a single relay output.
Wiring of the Version with a Single Current Output
Details wiring for devices equipped with a single current output.
Wiring the Version with Both Relay and Current Outputs (5-pin M12 Male Fixed Connector)
Covers wiring for devices with both relay and current outputs using M12 connectors.
Wiring the Version with Both Relay and Current Outputs (8-pin M12 Fixed Connector)
Explains wiring for devices with relay and current outputs using 8-pin M12 connectors.
Commissioning
Safety Information
Highlights safety precautions to be followed during the commissioning process.
Adjustment and Functions
Safety Information
Emphasizes safety measures for device adjustment and configuration.
Operating Levels
Describes the two operating levels: Process and Configuration.
Description of the Display and the Operating Keys
Explains the device display elements and the function of each key.
Process Level
Details how to access and use the Process level for reading values.
Configuration Level - Parameters Menu
Introduces the Parameters menu within the Configuration level for setting parameters.
Selecting the Unit of the Flow Rate
Guides users on how to select the desired unit for flow rate measurement.
Entering the K-Factor or Having it Determined by Teach-In
Explains methods for entering or determining the K-factor for accurate flow measurement.
Configuring the Relay or Transistor Output
Details how to configure the device's relay or transistor output settings.
Setting the Flow Rate Range Associated to the 4...20 mA Output
Describes setting the flow rate range for the 4...20 mA current output.
Choosing the Filter of the Flow Rate
Explains how to select a filter to attenuate flow rate fluctuations.
Entering the Flow Rate Range Related to the Bar Graph
Details setting flow rate values for the bar graph display.
Adjusting the Brightness of the Backlight or Deactivating the Backlight
Instructions for adjusting display backlight brightness or turning it off.
Activating and Defining the Access Code to the Configuration Level
Guides on setting up an access code for configuration menus.
Saving the Modified Parameters
Explains how to save or discard parameter changes.
Configuration Level - Test Menu
Introduces the Test menu for verifying configurations and signals.
Adjusting the 4...20 mA Output
Provides instructions for calibrating the 4...20 mA current output.
Default Settings
Default Settings
Lists the factory default configuration settings for the device.
Your Settings for the 8032 / the SE32 with S077
A template for users to record their custom device settings.
Maintenance and Troubleshooting
Safety Information
Safety precautions for maintenance and troubleshooting tasks.
Maintenance and Cleaning
Guidance on proper cleaning and general maintenance procedures.
If You Encounter Problems
Lists common error messages and recommended actions for troubleshooting.
Spare Parts and Accessories
Spare Parts and Accessories
Lists available spare parts and accessories with their article numbers.
Packaging, Transport
Packaging, Transport
Provides guidelines for safe packaging and transport of the device.
Disposal of the Device
Disposal of the Device
Instructs on the environmentally friendly disposal of the device and its packaging.
Need help?
Do you have a question about the SE32 and is the answer not in the manual?
Questions and answers