Burkert 8026 Quick Start Manual
  1. Manuals
  2. Brands
  3. Burkert Manuals
  4. Measuring Instruments
  5. 8026
  6. Quick start manual

Burkert 8026 Quick Start Manual

Flowmeter and flow transmitter
Hide thumbs Also See for 8026:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Quick Start Manual
Type 8026 - 8036 - SE36
Flowmeter and Flow transmitter
Durchfluss-Messgerät und Durchfluss-Transmitter
Débitmètre et transmetteur de débit
Quickstart
English
Deutsch
Français

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 8026 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Burkert 8026

Summary of Contents for Burkert 8026

  • Page 1 Type 8026 - 8036 - SE36 Flowmeter and Flow transmitter Durchfluss-Messgerät und Durchfluss-Transmitter Débitmètre et transmetteur de débit Quickstart English Deutsch Français...
  • Page 2 We reserve the right to make technical changes without notice. Technische Änderungen vorbehalten. Sous réserve de modifications techniques. © Bürkert SAS, 2009 - 2018 Operating Instructions 1809/03_EU-ML 00567366 / Original_FR...

  • Page 3: Table Of Contents

    6.6 Electrical data ................14 7 instAllAtion And wiring .............. 16 7.1 Safety instructions ...............16 7.2 Installation of a 8026 on a pipe ..........16 7.3 Installation of a 8036 on a pipe ..........18 7.4 Installation of a flow transmitter SE36 with sensor-fitting S070 or S077 in a pipe .............19 7.5 Wiring .....................21...

  • Page 4: About The Quickstart

    This quickstart describes the entire life cycle of the device. Please keep this quickstart in a safe place, accessible to all users and any • Type 8026 flowmeter, from the version V2, new owners. • Type 8036 flowmeter, from the version V2, •...

  • Page 5: Intended Use

    Refers to information contained in this quickstart or in other environment. documents. Type 8026 flowmeter, Type 8036 flowmeter and Type SE36 flow transmitter associated with a sensor-fitting are intended to measure the flow rate of liquids. ▶ Indicates an instruction to be carried out to avoid a danger, a ▶...

  • Page 6: Basic Safety Information

    Type 8026 - 8036 - SE36 Basic safety information bASic SAfETy informATion This safety information does not take into account any contingencies various dangerous situations or occurrences that may arise during installation, use and mainte- nance of the device. To avoid injury take care: ▶ not to use the device for the measurement of gas flow rates.

  • Page 7: General Information

    EN 61340-5-1 norm. ▶ Also make sure that you do not touch any of the live electrical 4.3 information on the internet components. You can find the Operating Instructions and technical data sheets for Type 8026, Type 8036 and Type SE36 at: www.burkert.com English...

  • Page 8: Description Of The Rating Plate

    Type 8026 - 8036 - SE36 Description of the rating plate DEScripTion of ThE rATinG plATE 1. Type of the device, measured variable and version 2. Power supply 8026 Flow-Meter 3. Output specifications Supply: 14-36VDC Output: 1x4-20mA 2xTransistors 500 mA Max 4. Type of sensor Cell: HALL INSERTION SHORT 5.

  • Page 9: Technical Data

    Protection rating IP65 and IP67 with connectors plugged Type 8026 flowmeter, Type S030, Type S070 and Type S077 fit- according to in and tightened and electronic module tings conform to Article 4, Paragraph 1 of the Pressure Equipment...

  • Page 10: Materials

    Axis and shaft of the paddle Ceramic (Al Ceramic (Al PVDF wheel (only 8026) Fig. 2:  Materials used in the flowmeter 8026 Paddle wheel (only 8026) PVDF Quarter-turn system (only SE36) PC • Materials of the flowmeter 8026 in contact with the fluid: PVDF, ceramic, FKM (default). English...
  • Page 11 Type 8026 - 8036 - SE36 Technical data P (bar) PVDF + Metal Nickel-plated brass Silicone (or stainless steel) Metal (PN10) PVC + PP Stainless steel PVC (PN10) EPDM PVDF (PN10) PP (PN10) +90 +110 T (°C) A: Operating range Fig. 3:  Materials used in the flow transmitter SE36 Fig. 4:  Fluid temperature / fluid pressure dependency for flowmeter 8026  associated to a fitting S020...

  • Page 12: Fluid Data

    • S070 or S077 for flow transmitter SE36: see the Operating Instructions of the fitting fluid temperature • 8026 • –15...+100 °C; Also factor in the fluid temperature / fluid pressure dependency for the 8026 with fitting S020: see Fig. 4 • 8036 • see the Operating Instructions, delivered with the fitting S030 •...
  • Page 13 Type 8026 - 8036 - SE36 Technical data solid particle rate in the fluid • ≤ 1 % • 8026 and 8036 • SE36 with fitting S070 or S077 • 0 % flow rate measurement for 8026 and 8036 • Measurement range • 0.3...10 m/s • Linearity • ±0.5 % of the full scale (10 m/s) •...

  • Page 14: Electrical Data

    Type 8026 - 8036 - SE36 Technical data 6.6 Electrical data 14...36 v dc power supply • Connection to main supply: permanent (through external SELV and through LPS version with 2 or 3 outputs (2 wires) power supply) • filtered and regulated • oscillation rate: ±10 % 12...36 v dc power supply • Connection to main supply: permanent (through external SELV and through LPS...
  • Page 15 Type 8026 - 8036 - SE36 Technical data transistor output • Version with only 1 transistor output • NPN, open collector, 700 mA max., 1...36 V DC • Version with 2 transistor outputs • NPN (/sink) or PNP (/source) (depending on parameter setting), open collector, 700 mA max., 500 mA max. per transistor if both transistor outputs are wired.

  • Page 16: Installation And Wiring

    Type 8026 - 8036 - SE36 Installation and wiring inSTAllATion AnD WirinG Warning 7.1 Safety instructions risk of injury due to unintentional switch on of power supply or uncontrolled restarting of the installation. Danger ▶ Take appropriate measures to avoid unintentional activation of risk of injury due to high pressure in the installation. the installation. ▶ Guarantee a defined or controlled restarting of the process after ▶ Stop the circulation of fluid, cut off the pressure and drain the pipe before loosening the process connections.
  • Page 17 Type 8026 - 8036 - SE36 Installation and wiring Follow the next steps to install the flowmeter 8026 properly: 7.2.1 install the fitting S020 in the pipe → Select a fitting S020 adapted to the fluid velocity. Correct Incorrect To select a fitting, please refer to the chart in the technical data sheet of the related fitting.

  • Page 18: Installation Of A 8036 On A Pipe

    Type 8026 - 8036 - SE36 Installation and wiring 7.2.2 install the flowmeter 8026 into the 7.3 installation of a 8036 on a pipe fitting S020 Danger → Check that there is a seal on the device risk of injury due to high pressure in the installation. and that it is not damaged. ▶ Stop the circulation of fluid, cut off the pressure and drain the Replace the seal if necessary.

  • Page 19: Installation Of A Flow Transmitter Se36 With Sensor-Fitting S070 Or S077 In A Pipe

    Type 8026 - 8036 - SE36 Installation and wiring 7.3.3 complete the installation of the 8036 Caution → Wire the device (see chap. 7.5) and supply power to the device. risk of damage when installing the fitting. → Set the K-factor or determine it through a Teach-In procedure ▶ Respect the installation instructions given in the Operating (see chap.
  • Page 20 Type 8026 - 8036 - SE36 Installation and wiring 7.4.2 Assemble the flow transmitter SE36 on To select a fitting, please refer to the chart in the technical the sensor-fitting S070 or S077 data sheet of the related fitting. → 1: Insert the flow transmitter → Install the sensor-fitting S070 or S077 in the pipe so that the SE36in the sensor holder.

  • Page 21: Wiring

    Type 8026 - 8036 - SE36 Installation and wiring 7.4.3 complete the installation of the flow 7.5.1 Electrical connections transmitter SE36 with the sensor-fitting number of fixed type of connectors S070 or S077 connectors → Wire the device (see chap. 7.5) and supply power to the device. 1 male M12 fixed female 5-pin M12 (available as an → Set the K-factor or determine it through a Teach-In procedure...
  • Page 22 Type 8026 - 8036 - SE36 Installation and wiring Pin of the female m12 connector available colour of the wire as an accessory (article number 438680) brown white Power supply blue black green/yellow or grey 7.5.3 Equipotentiality of the installation To ensure the equipotentiality of the installation (power supply - device - fluid): Fig. 12:  Equipotentiality skeleton diagram with pipes in metal → Connect together the various earth spots in the installation to eliminate the potential differences that may occur between dif- ferent earthes.
  • Page 23 Type 8026 - 8036 - SE36 Installation and wiring 7.5.4 Wiring a version with a single m12 fixed connector and an npn transistor Load output and a current output NPN transistor output (TR1) white V+ (14...36 V DC) blue brown green/yellow Not connected or grey Fig. 14:  Pin assignment of the male fixed connector on a version with 1  NPN transistor output and 1 current output 14-36 VDC Power supply 4...20 mA input (external instrument) Fig. 15:  Wiring the NPN transistor output and the current output in sinking  mode (parameter setting "NPN/sink", cannot be changed), on a ...
  • Page 24 Type 8026 - 8036 - SE36 Installation and wiring 7.5.5 Wiring a version with a single m12 4...20 mA input (external fixed connector and two transistor Load 1 instrument) outputs and one current output Transistor output 1 (TR1) white brown black V+ (14...36 V DC) green/yellow blue or grey Transistor output 2 (TR2) 14-36 V DC Fig. 16:  Pin assignment of the male fixed connector on a version with  Load 2 Power supply 2 transistor outputs and 1 current output...
  • Page 25 Type 8026 - 8036 - SE36 Installation and wiring 7.5.6 Wiring a version with two m12 fixed 4...20 mA input (external connectors and two transistor outputs instrument) and two current outputs Load 1 Connect the power supply for the device to the male fixed white connector; the supply is then transferred internally to pins 1 blue and 3 of the female fixed connector in order to ease wiring of the load to the female fixed connector.
  • Page 26 Type 8026 - 8036 - SE36 Installation and wiring Load 1 Load 2 Load 1 Load 2 white white white white blue brown brown blue brown blue green/yel- green/yel- black black low or grey black low or grey black 12-36 V DC 12-36 V DC Power supply 4...20 mA input...

  • Page 27: Adjustment And Commissioning

    Type 8026 - 8036 - SE36 Adjustment and commissioning ADjuSTmEnT AnD Warning commiSSioninG danger due to nonconforming commissioning. • The settings can only be done on a device with a display Nonconforming commissioning could lead to injuries and damage module. the device and its surroundings. • Do not remove the display module while making the set- ▶...

  • Page 28: Using The Navigation Button

    Type 8026 - 8036 - SE36 Adjustment and commissioning 8.3 using the navigation button • to read both the lowest and highest values of the flow rate or the input frequency that have been measured by the device since the latest reset (this feature is not active by default), Symbolized by •...
  • Page 29 Type 8026 - 8036 - SE36 Adjustment and commissioning you want to... Press... you want to... Press..browse in Process level ...browse in the dynamic func- • next function: tions bar (MEAS, BACK, • next screen: ABORT, OK, YES, NO) • previous function: ...confirm the highlighted • previous screen: dynamic function •...

  • Page 30: Using The Dynamic Functions

    Type 8026 - 8036 - SE36 Adjustment and commissioning 8.4 using the dynamic functions 8.5 knowing the display 8.5.1 knowing the display at the power-up you want to... choose... of the device ...go back to the Process level, dynamic function "MEAS" When the device is switched on or the display module mounted without validating the modifica- on the transmitter, the display indicates the software version of the tions made display.
  • Page 31 Type 8026 - 8036 - SE36 Adjustment and commissioning 8.5.2 knowing the icons and lEDs The display module is not available on all versions of the device. The display module can be ordered as an accessory. Yellow LED: shows that Green LED: shows that the device is energized transistor 1 is switched flow_l 600.0l/h...

  • Page 32: Knowing The Process Level

    Type 8026 - 8036 - SE36 Adjustment and commissioning 8.6 knowing the process level icon Possible cause and alternatives Sensor input frequency within the defined ranges 1) 2) flow_l First view of the Pro- The alternatives, in this position, if monitoring of the 1243l/h sensor input frequency is activated, are: cess level.
  • Page 33 Type 8026 - 8036 - SE36 Adjustment and commissioning Display of the second Zoom on the value of tot2_m volume totalizer. the first current output. Reset Yes/No 18.3 mA Zoom on the value of Display of the mini- the second current 7.5 mA mum and maximum 1250l/h output.

  • Page 34: Knowing The Configuration Level

    Type 8026 - 8036 - SE36 Adjustment and commissioning 8.7 knowing the configuration level Only the most current functions are described in the quickstart. For the use of the other functions, refer to the Operating Instructions available at: www.burkert.com. 8.7.1 Setting the data displayed in process level Param Display Line1 / Line2 Line 1/Line2:...
  • Page 35 Type 8026 - 8036 - SE36 Adjustment and commissioning 8.7.2 choosing the units for the totalizers displayed in process level The totalizers are saved if a power cut occurs. Display Param Totalizers Total1 / Total 2 Unit Liter This is This is when the when the device is be- device is be- ing parame- ing parame- tered....
  • Page 36 Type 8026 - 8036 - SE36 Adjustment and commissioning 8.7.4 Setting the parameters of the current outputs The 2nd current output "AC2" is only available on a version with 2 current outputs. Param Outputs AC1 / AC2 PVar: Flow_L This is This is Flow_m3 when the when the device is be-...
  • Page 37 Type 8026 - 8036 - SE36 Adjustment and commissioning 8.7.5 Setting the parameters of the transistor outputs The 2 transistor output "TR2" is only available on a version with 2 transistor outputs. Outputs Param TR1 / TR2 PVar: Flow_L Flow_m3 This is This is when the when the device is be-...
  • Page 38 Type 8026 - 8036 - SE36 Adjustment and commissioning Outputs Param TR1 / TR2 Mode: Hysteresis Window This is This is when the when the device is be- device is be- Pulse ing parame- ing parame- If "PVar" ≠ "Warning" tered.... tered............ Low:...
  • Page 39 Type 8026 - 8036 - SE36 Adjustment and commissioning 8.7.7 Adjusting the current outputs Warning risk of injury due to wrong adjustment. ▶ Make sure the Hold mode is disabled (see chap. 8.7.6). Outputs Calib AC1 / AC2 4mA: INPUT 20mA: INPUT The entered values are not memorised in this menu. Only the values emitted on the current outputs are adjusted after pressing “OK”...
  • Page 40 Type 8026 - 8036 - SE36 Adjustment and commissioning 8.7.8 Entering the k factor or determining it with Teach-in Calib Sensor K.fact. INPUT PVar: Litre Vol.Teach Igal Start Teach Meas.Progress Input Vol. Cal. Result Flow Teach PVar: Flow_L Flow_m3 Flow_gal Flow_Igal Freq. Start Teach Measure Flow Teach Cal. Result English...

  • Page 41: Maintenance And Troubleshooting

    ▶ Store the device in a dry place away from dust. ▶ Ensure that the restart of the installation is controlled after any ▶ Storing temperature for type 8026: –10...+60 °C. interventions. ▶ Storing temperature for type SE36: –10...+60 °C.

  • Page 42: 12 Disposal Of The Device

    Type 8026 - 8036 - SE36 Disposal of the device 12 DiSpoSAl of ThE DEVicE → Dispose of the device and its packaging in an environmentally- friendly way. notiCe damage to the environment caused by parts contaminated by fluids. ▶ Comply with the national and/or local regulations which concern the area of waste disposal. English...
  • Page 44 www.burkert.com...

This manual is also suitable for:

Se368036

Table of Contents