Falcon E3800 User, Installation And Servicing Instructions

Electric bratt pan

Advertisement

Quick Links

USERS, INSTALLATION AND SERVICING INSTRUCTIONS
ELECTRIC BRATT PAN
E3800
DATE PURCHASED:
MODEL NUMBER:
SERIAL NUMBER:
DEALER:
T100839 Rev.8
SERVICE PROVIDER:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the E3800 and is the answer not in the manual?

Questions and answers

Summarization of Contents

OPERATION
Controls
Overview of the thermostat control, pan tilting handle, water tap, and indicator neons.
Using the Bratt Pan
Step-by-step guide on lowering the pan, turning on power, setting temperature, and using the water tap.
GETTING THE MOST OUT OF THE APPLIANCE
Advice on saving energy by turning off the appliance when not in use.
SPECIFICATION
Model Number covered in this group of products
Lists the model E3800 as an 800mm wide manual lift electric Bratt Pan.
Technical Data
Provides technical data including Total Power (kW) and Current (A) at 230V for the E3800 model.
DIMENSIONS / ELECTRICAL CONNECTION LOCATIONS
Displays diagrams showing the appliance's dimensions and locations for electrical and water connections.
INSTALLATION
Unpacking
Instructions for removing packaging, plastic coating, checking parts, and fitting the lid handle.
Siting / Clearances
Details required clearances from combustible walls and placement on a level, fireproof surface.
Electric Supply & Connection
Specifies the 400V 3N~ terminal arrangement, cable handling, and isolating switch requirements.
Water Supply
Describes the connection method using a ½" BSPP fitting and maximum water pressure.
Assembly
Guidance on positioning, leveling using feet adjusters, and connecting to supplies.
Commissioning
Steps to turn on the appliance, check water, set temperature, and verify operation.
SERVICING
REMOVAL OF FRONT FASCIA / ACCESS TO ELECTRICS BOX
Step-by-step instructions with diagrams for removing the front fascia to access the electrics box.
NEONS
Explains that neons are attached to the front fascia and how to replace them.
OPERATING THERMOSTAT
Instructions for replacing the operating thermostat located in the electrics box.
SAFETY THERMOSTAT
Details on locating, resetting, and replacing the safety thermostat.
TILT SWITCH
Information on the location and potential replacement of the tilt switch.
CONTACTOR
Guidance on how to replace the contactors located within the electrics box.
ELEMENTS
Instructions for accessing and replacing the heating elements in the bratt pan.

Table of Contents