Arcam AV888 Handbook page 35

SaT device Mode
SAT
The z Device Mode button configures the CR102
to control the functions of a satellite receiver. You will
need to configure this Device Mode to work with your
equipment. Pressing this button also selects as the
SAT
AVR500/AVR600/AV888 source.
Toggles power between standby and on
P
9 Functions as original remote number key.
0
...
Selects input on the AVR500/AVR600/
TApE
PHONO
AV888.
E
+ E selects input on the
ShiFT phono
AVR500/AVR600/AV888.
Toggles between the available inputs on
TV/AV
your satellite receiver
r
Modifies many keys (see individual key
S
descriptions, below)
Selects multichannel ( ) input on the
AUX MCh
H AVR500/AVR600/AV888.
+ H selects input on the
ShiFT AuX
AVR500/AVR600/AV888.
Selects input on the AVR500/AVR600/
ipoD
NET
e AV888
+ e selects network ( ) internal
ShiFT nET
input on the AVR500/AVR600/AV888
Navigate menus.
confirms a setting (equivalent to 'Enter'
oK
OK
or 'Select' on some remotes).
M Controls Backup function, if available.
Performs same function as on original
U
remote, if available.
On some Satellite and Cable set top boxes
D
this key functions as the Guide key to open
the EPG (Electronic Program Guide).
Toggles the mute function.
@
By default this key operates the AVR500/
AVR600/AV888 Mute
Channel down
]
Channel up
[
- + Decrease ( ) and increase ( ) AVR500/
– +
AVR600/AV888 volume
) Fast rewind
$ Starts the playback
Toggles pause of playback
&
Fast forward
(
(not used)
!
Stop playback
#
Start recording
%
(not used)
h
Duplicates function of key for some
u RED
Satellite and Cable set-top boxes
(RED)
Duplicates function of key for some
t
gREEn
Satellite and Cable set-top boxes
(GREEN)
Duplicates function of key for some
o
yEllow
Satellite and Cable set-top boxes
(yELLOw)
Duplicates function of key for some
b
BluE
Satellite and Cable set-top boxes
(BLUE)
aV device Mode
AV
The a Device Mode button configures the CR102 to
control the functions of a television or other display
device. You will need to configure this Device Mode to
work with your equipment. Pressing this button also
selects as the AVR500/AVR600/AV888 source.
AV
Toggles power between standby and on.
P
(Some TVs require you to use a number
key to turn them on.)
9 Functions as original remote number key –
0
...
usually for channel selection.
Selects Tape input on the AVR500/
PHONO
AVR600/AV888.
E
+ E selects
input on the
ShiFT phono
AVR600/AV888.
Toggles between the available inputs on
TV/AV
your display device (e.g. TV/AV)
r
Modifies many keys (see individual key
S
descriptions, below)
Selects multichannel ( ) input on the
MCh
AUX
H
AVR500/AVR600/AV888.
+ H selects input on the
ShiFT AuX
AVR500/AVR600/AV888.
Navigate setup and programme selection
menus.
OK
confirms a selection (equivalent to
oK
'Enter' or 'Select' on some remotes).
function on some models.
M EXiT
Functions as original remote key, if
U
available.
Display INFO or OSD (On Screen Display)
D
function, if available.
Toggles the mute function.
@
By default this key operates the AVR500/
AVR600/AV888 Mute
Channel down
]
Channel up
[
Decrease ( ) and increase ( ) AVR500/
– +
- +
AVR600/AV888 volume.
Toggles TEXT page on/off
)
TEXT page off
$
E-33
Turns Programme-In-Programme (PIP)
&
on, if available
Activates PIP move, if available
(
Activates PIP swap, if available
!
Activates PIP freeze, if available
#
Activates PIP channel up, if available
%
Activates PIP channel down, if available
h
Duplicates function of key for Text TV
u
RED
(RED)
Duplicates function of key for Text
t
gREEn
TV
(GREEN)
Duplicates function of key for Text
o
yEllow
TV
(yELLOw)
Duplicates function of key for Text
b
BluE
TV
(BLUE)