Maintenance And Servicing - Chicago Electric Power Systems 97047 Set Up And Operating Instructions Manual

CAution!
verter or the appliance. When first using a rechargeable device, check the
inverter's temperature for the first 10 minutes. If it becomes abnormally
hot, do not use this device with the inverter.
power Switch
2. Flip the Power Switch to the ON position to turn on. Do not use the appliance
until the switch illuminates.
3. Turn on appliance. If an alarm sound is heard, turn off the appliance and see
the Troubleshooting section.
CAution!
to recharge the battery. Doing this will help prevent any unexpected
shutdown of the equipment. this will also help ensure that there will be
enough battery power to start the vehicle. Due to the risk of carbon mon-
oxide inhalation do not run the vehicle's engine within an enclosed area.
4. After use, disconnect the appliances and flip the Switch to the OFF position.
. Clean, then store the tool indoors out of children's reach.
wArning wArning
SKU 97047
Some rechargeable appliances may damage the power in-
it is recommended that the vehicle be started every hour

MAintenAnCe AnD ServiCing

risk of serious personal injury from accidental starting or
electric shock. turn the power Switch of the tool to the
"oFF" position and disconnect the tool from the battery
before performing any inspection, maintenance, or cleaning
procedures.
Damaged equipment can fail, causing serious personal
injury. Do not use damaged equipment. if abnormal noise
or vibration occurs, have the problem corrected before
further use.
For technical questions, please call 1-800-444-3353.
outlets
Page 10