Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Forza FDC-3002R
Summarization of Contents
Introduction
1-1. Transportation
Instructions for transporting the UPS system in its original packaging to protect it against shock and impact.
1-2. Preliminary Steps
Steps to take before installation, including drying the unit and avoiding water or sunlight exposure.
1-3. Initial Setup
Guidance on connecting appliances, cable placement, and using appropriate cables for the UPS system.
1-4. Important Safety Instructions
Essential safety guidelines for connecting, operating, grounding, and disabling the UPS unit safely.
1-5. Maintenance, Service, and Faults
Information on performing maintenance, service procedures, and handling faults on the UPS unit.
Operation
2-1. Unpacking and Inspection
Procedure for unpacking the UPS, verifying all included items, and checking for shipping damage.
2-2. UPS Diagram
Diagrams showing the front and rear views of the UPS unit with labeled components for identification.
2-3. Installation Procedure
Guidelines for choosing a suitable location and installing the UPS unit to ensure proper airflow and temperature.
UPS Connections
2-4.1 UPS Input Connection
Instructions for connecting the UPS to a grounded receptacle, including circuit protection requirements.
2-4.2 UPS Output Connection
Explanation of connecting devices to programmable and general outlets for optimal backup power distribution.
2-4.3 Disabling and Enabling the EPO Function
How to disable and enable the Emergency Power Off (EPO) function by managing specific pins.
Turning On and Battery Replacement
2.5 Turning on the UPS
Procedure for powering on the UPS by pressing the ON/Mute button for a specified duration.
2.6 Battery Replacement
Step-by-step guide for replacing UPS batteries, emphasizing that only qualified personnel should perform it.
2-7 ForzaTracker Monitoring Software
Information on the ForzaTracker monitoring software, its features, and installation procedure.
Advanced Operation
3-1. Description of Buttons and Functions
Details the functions of the ON/Mute, SELECT, and OFF/ENTER buttons on the UPS.
3-2. LCD Panel
Explains the LCD panel displays, including backup time, load information, UPS status, and fault indicators.
3-3. Audible Alarm
Describes the audible alarms for different UPS states like low battery, overload, and faults.
Parameter Settings and Modes
3-4. Abbreviations on the LCD Display
Lists abbreviations displayed on the LCD and their corresponding meanings for clarity.
3-5. UPS Parameter Settings
Covers configuration options for output voltage, frequency, ECO, AECO, and bypass modes.
06: ECO Voltage Range Setting
Sets acceptable high and low voltage points for ECO & AECO modes based on voltage ranges.
07: Bypass Enable/Disable
Instructions to activate or cancel the bypass mode of the UPS.
08: Bypass Voltage Range Setting
Sets acceptable high and low voltage values for bypass operation in different voltage ranges.
09: Bypass Frequency Range Setting
Sets acceptable high and low frequency points for bypass mode based on output frequency.
10: Programmable Outlets Enable/Disable
Activates or cancels the programmable outlet feature for flexible power management.
11: Backup Time Setting for Programmable Outlets
Defines backup time limits in minutes for programmable outlets to manage non-critical devices.
12: Backup Time Setting for General Outlets
Configures the backup time on battery mode for general outlets, or disables the timer.
13: Battery Total Ah Setting
Configures the total battery capacity in Ampere-hours (Ah) for the UPS system.
14: Maximum Charger Current Setting
Configures the maximum charger current to be applied, with options for different ampere settings.
15: Charger Boost Voltage Setting
Configures the boost voltage level for the charger, setting it within a specific voltage range.
16: Charger Float Voltage Setting
Determines the float voltage level for the charger, setting it within a specific voltage range.
3-6. Operation Mode Description
Explains the different operation modes of the UPS, including Online, ECO, Battery, and Bypass modes.
Troubleshooting and Warnings
3-7. Fault Codes
Lists various fault codes, their events, and corresponding icons for diagnosing UPS issues.
4. Troubleshooting Guide
Provides a guide to troubleshoot common UPS problems, symptoms, possible causes, and remedies.
3-8. Warning Indicators
Details warning indicators, their icons, codes, alarms, and associated meanings for UPS status.
Storage, Maintenance, and Specifications
5. Storage and Maintenance
Provides guidelines for storing the UPS unit and performing basic maintenance, including battery replacement.
6. Specifications
Lists the technical specifications for the FDC-1502R and FDC-3002R UPS models.
Need help?
Do you have a question about the FDC-3002R and is the answer not in the manual?
Questions and answers