Related Manuals for Thermo Scientific SRD-3400
Summarization of Contents
Introduction to the SRD-3x00 Solvent Rack
How to Use this Manual
Explains the manual's structure and recommendations for understanding the Solvent Rack.
Safety Information
Provides an overview of safety labels and their meaning.
Intended Use of the SRD
Describes the intended application and limitations of the SRD.
Federal Communications Commission (FCC) Note
Details compliance with FCC regulations for Class A digital devices.
Overview of the SRD-3x00 Solvent Rack
Unit Description
Describes the SRD as a module for HPLC systems and its components.
SRD Configurations
Lists available SRD models (SRD-3600, SRD-3400, SRD-3200) with their features.
Front Panel Elements
Identifies and explains the function of front panel indicators and buttons.
Rear Panel
Describes the ports and connectors located on the rear of the SRD.
Fluid Connections
Explains how to access and manage the fluid connections on the SRD.
Leak Sensor
Details the function and reporting of the SRD's leak sensor.
Wellness Features
Describes system wellness features for monitoring SRD health and detecting problems.
Installation of the SRD-3x00 Solvent Rack
Facility Requirements
Outlines the necessary environmental and power requirements for installation.
Unpacking the SRD
Provides instructions for safely unpacking the SRD and checking for damage.
Positioning the SRD in the UltiMate 3000 System
Guides on how to position and stack the SRD within an UltiMate 3000 system.
Connecting the SRD
Instructions for connecting the SRD to the pump or main power supply.
Preparation for Operation (Startup)
Overview of Startup Steps
Lists the steps required to prepare the SRD for operation after installation.
Connecting Drain Tubing
Details how to connect the drain tubing for liquid leak discharge.
Solvent Reservoirs Setup
Instructions and precautions for connecting solvent reservoirs and tubing.
Operation and Maintenance
Choosing the Solvents
Guidelines and precautions for selecting compatible and appropriate solvents.
General Notes for Degasser Operation
Provides tips for optimizing degassing performance and maintenance.
Operational Settings
Explains how to turn the degasser on/off via pump display or Chromeleon.
Special Chromeleon Functions
Covers functions like leak/vacuum monitoring and SRD diagnostics in Chromeleon.
Shut Down Procedures
Precautions and procedures for safely shutting down or shipping the SRD.
Routine and Preventive Maintenance
Details regular and annual maintenance tasks for the SRD.
Troubleshooting the SRD-3x00 Solvent Rack
Troubleshooting Overview
Introduces features like status LEDs, messages, and diagnostics for troubleshooting.
Messages on the Pump Display
Lists common SRD messages and their recommended remedial actions.
Chromeleon Diagnostics Message
Explains how to interpret and act on Chromeleon diagnostic test results.
Operating Problems and Solutions
Provides a table of common operating problems, causes, and solutions.
Service and Repair
General Notes and Safety Precautions for Service
Covers general safety for service procedures and handling solvents.
Rinsing the Degassing Channels
Step-by-step instructions for rinsing degassing channels to prevent contamination.
Eliminating Leakage in the Solvent Rack
Procedures for identifying, eliminating, and drying leaks detected by the sensor.
Technical Information
Bottle Capacity
Details the various capacities and configurations for solvent reservoirs.
Degassing Channels
Lists the number of vacuum channels for different SRD models.
Degasser Membranes
Specifies the material used for degasser membranes.
Channel Volume
States the volume of the degasser channels.
Max. Flow Rate per Channel
Indicates the maximum flow rate per degasser channel.
Control Method
Describes how the SRD is controlled (system pump or standalone).
Communication Interface
Specifies the communication interface used by the SRD.
Power Supply Options
Details the power connection options for the SRD.
User Input and Display
Lists the user interface elements like LEDs and buttons.
Wetted Parts Materials
Lists materials in contact with solvents for chemical compatibility.
Safety Features
Outlines the built-in safety monitoring features.
Environmental Conditions
Specifies the recommended operating temperature and humidity ranges.
Power Requirements
States the maximum power consumption of the SRD.
Emission Sound Pressure Level
Provides the sound emission level of the instrument.
Dimensions (H x W x D)
Lists the physical dimensions of the SRD.
Weight
States the weight of the SRD without bottles.
Accessories, Consumables, and Spare Parts
Standard Accessories
Lists accessories included with the SRD, with quantities and part numbers.
Optional Accessories
Lists optional accessories available for the SRD and their purpose.
Consumables and Spare Parts
Lists consumable items and spare parts with their respective part numbers.
Pin Assignment
15-pin D-Sub Port Details
Details the pinout and signal assignments for the 15-pin D-Sub connector.
DC Input Connection
Explains the DC input for connecting to the main power supply.
Need help?
Do you have a question about the SRD-3400 and is the answer not in the manual?
Questions and answers