Table of Contents
Advertisement
Quick Links
Instruction Manual for the
E-SC
1600 /
E-SC
1602 Series
WARNING - Read all instructions before beginning installation or use of this gate
opener. This operator exerts a high level of force. Exercise caution at all times and
stay clear of the system during operation.
Estate Swing E-SC 1600 / E-SC 1602 Column Mounted Gate Opener Instructions.
Advertisement
Table of Contents
Related Manuals for Estate Swing E-SC 1602 Series
Summarization of Contents
Estate Swing Summary of Functions
Class I Setting Description
Definition of Class I for vehicular gate openers in residential settings.
Standard System Overview and Safety Zones
IMPORTANT Preliminary Checks
Essential pre-installation checks for gate openers to ensure safety and efficiency.
Wiring the Operator Arm(s)
Single Gate Opener: Left Mount Wiring
Wiring instructions for left-mounted single gate openers.
Single Gate Opener: Right Mount Wiring
Wiring instructions for right-mounted single gate openers.
Dual Gate Opener Wiring
Wiring instructions for dual gate systems.
Operating Parameters Customization
Parameter P1: Run Time
Setting the operational run time for the gate.
Parameter P2: Slow Down Time
Adjusting the gate slowdown speed duration.
Parameter P3: Force Setting
Configuring the force applied by the opener.
Parameter P4: Delay Between Leafs
Setting delay for dual leaf gates.
Parameter P5: Gate Lock Release Time
Duration for electric lock output.
Parameter P6: Automatic Re-close Delay
Delay for auto re-closing the gate.
Troubleshooting
Gate Opener Not Stopping on Limit Switches
Issues with limit switch operation.
One or Both Arms Not Moving
Troubleshooting non-moving gate arms.
General Fix for Operation Understanding
Procedure for understanding gate operation.
Dual Gate: Only One Arm Moves
Diagnosing single arm movement in dual gates.
Control Board Overview
Operational Sequence: Auto-Close ON
Gate behavior with auto-close enabled.
Operational Sequence: Auto-Close OFF
Gate behavior with auto-close disabled.
Control Board Overview
PUSH2 Terminal Operation
Details on the PUSH2 terminal function.
Operational Sequence: PUSH2 Auto-Close ON
PUSH2 behavior with auto-close enabled.
Operational Sequence: PUSH2 Auto-Close OFF
PUSH2 behavior with auto-close disabled.
Control Board Overview
Light Output Definition
Explanation of the light signal.
Motor 1 Terminal Definitions
Wiring for Motor 1.
Motor 2 Terminal Definitions
Wiring for Motor 2.
Limit 1 Terminal Definitions
Wiring for Limit 1.
Limit 2 Terminal Definitions
Wiring for Limit 2.
Photocell Terminal Definitions
Wiring for Photocell.
Button Terminal Definitions
Wiring for Button terminals.
E_Lock Terminal Definition
Definition of E_Lock output.
Fuse Definitions
Information on the fuses.
Control Board Overview
Display Indicators
Control board display light meanings.
Buzzer / Obstructions
Obstruction detection and alarm.
Accessory Wiring
Keypads and Receivers Wiring
Connecting keypads and receivers.
Push Button and Intercoms Wiring
Connecting push buttons and intercoms.
Exit Wand/Sensor/Loop Wiring
Connecting exit devices.
Accessory Wiring
Photo Eye, Safety Edge, Safety Loop Wiring
Connecting safety sensors.
Solenoid Gate Lock Wiring
Wiring solenoid gate locks.
Magnetic Gate Lock Wiring
Wiring magnetic gate locks.
Need help?
Do you have a question about the E-SC 1602 Series and is the answer not in the manual?
Questions and answers