Please Read The Following Carefully - Central Machinery 45656 Operating Instructions Manual

CHUCK VALVE (#28E)
FIGURE O
8. To clean or replace the Center Chuck Valve (28E), remove the Side Cover (33B),
which is located on the left side of the Body Assembly, by unscrewing the four
Screws.
(See Figure E, F, O, and Assy. Diagram B.)
9. Remove the Air Hoses (40E) from the Center Chuck Valve (28E).
10. Clean the Center Chuck Valve (28E), using a jet of compressed air. Or if
necessary, replace the unit.
11. For cleaning or replacing the Bead Breaker Valve (41E), follow Steps #8, 9, and
10 above. (See Figure O, and Assy. Diagram E.)

plEASE READ THE FOllOWING CAREFUllY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM
IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER
NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND
TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE
PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE
PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY
STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN
BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER
ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE
ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF
HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
SKU 45656 For technical questions, please call 1-800-444-3353.
CENTER
AIR HOSE (#40E)
SILENCER (#36E)
Page 15