Download
Share
Print this page
Central Machinery 63471 Owner's Manual & Safety Instructions
  1. Manuals
  2. Brands
  3. Central Machinery Manuals
  4. Power Tool
  5. 63471
  6. Owner's manual & safety instructions

Central Machinery 63471 Owner's Manual & Safety Instructions

10", 12 speed bench drill press
Hide thumbs

Advertisement

Quick Links

Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2016 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
17f

Advertisement

loading

Related Manuals for Central Machinery 63471

Summary of Contents for Central Machinery 63471

  • Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

  • Page 2: Table Of Contents

    8. USE RIGHT TOOL. Don’t force tool or attachment If in doubt, use the next heavier gauge. to do a job for which it was not designed. The smaller the gauge number, the heavier the cord. Page 2 For technical questions, please call 1-888-866-5797. Item 63471...
  • Page 3 The conductor with insulation having an outer surface that is green with or without yellow stripes is the equipment-grounding conductor. Item 63471 For technical questions, please call 1-888-866-5797. Page 3...
  • Page 4 Eye protection must be ANSI-approved and breathing protection must be NIOSH-approved for the specific hazards in the work area. Page 4 For technical questions, please call 1-888-866-5797. Item 63471...

  • Page 5: Specifications

    Before assembly, bolt the Base to a flat, level, utility lines before drilling or driving screws. solid workbench capable of supporting the weight of the drill press and any workpieces. Item 63471 For technical questions, please call 1-888-866-5797. Page 5...
  • Page 6 Rack (7). Tighten the Set Screw (17), but do not overtighten it. Screw (22) Height crank (23) Figure D: Installing Height crank Page 6 For technical questions, please call 1-888-866-5797. Item 63471...
  • Page 7 Spindle shaft. Firmly a solid fit of the Chuck on the Spindle. tap the Arbor nose with a rubber mallet. Item 63471 For technical questions, please call 1-888-866-5797. Page 7...

  • Page 8: Operating Instructions

    (C). Figure H: Drill Depth Adjustment 3. Lock the collar in this position using the locking screw. Page 8 For technical questions, please call 1-888-866-5797. Item 63471...
  • Page 9 1″, ensuring that the jaws the drill bit is centered within the jaws. do not touch the flutes of the drill bit. 3. Tighten the Chuck securely with the included Chuck Key. Item 63471 For technical questions, please call 1-888-866-5797. Page 9...
  • Page 10 Figure L: Bracing workpiece against column 8. FOR FLAT WORK, lay the piece on to a wooden base and clamp it down firmly against the table to prevent it from turning. Page 10 For technical questions, please call 1-888-866-5797. Item 63471...
  • Page 11 Clean, then store the tool indoors out of children’s reach. 4. Pull down on the Feed Knob and slowly drill the hole into the workpiece. Item 63471 For technical questions, please call 1-888-866-5797. Page 11...

  • Page 12: Maintenance And Servicing

    Belt Inspection and Tensioning 1. Examine belt for cracks, tears in the backing, and other damage. 2. Replace belt if damaged, following the instructions under Changing Drill Speed on page 9. Page 12 For technical questions, please call 1-888-866-5797. Item 63471...
  • Page 13 See Table A on page 2. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service. Item 63471 For technical questions, please call 1-888-866-5797. Page 13...

  • Page 14: Parts List And Diagram

    Bolt M8×20 Motor Bracket O-Ring Spring Washer 10 Ball Bearing 6005 Nut M10 Retaining Ring 12 Motor Retaining Ring 42 Motor Pulley Ball Bearing 6004 Screw M6×10 Bushing V-Belt 0-460 Page 14 For technical questions, please call 1-888-866-5797. Item 63471...
  • Page 15 Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Item 63471 For technical questions, please call 1-888-866-5797. Page 15...

  • Page 16: Warranty

    Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.