Table of Contents
Advertisement
(SEE FIGURES A, B, E, AND ASSY. DIAGRAM E.)
2.
USE ClEAN, DRY, REGUlATED COMpRESSED AIR AT Up TO 110 pSI. Do
not exceed the recommended maximum of 110 PSI. Never use oxygen, carbon
dioxide, combustible gases or any other bottled gas as a power source for this
tool.
3.
WHEN CONNECTING TO THE AIR SUpplY:
A. Wrap approximately 4" of Teflon tape around the male threads of a Quick
Connector (not provided). Then, wrench tighten the Quick Connector into the
Pressure Regulator (5F). (See Figures A, C, and E.)
B. If an automatic oiler is not used, add two drops of oil into the Quick Connector
of the Pressure Regulator (5F).
SKU 45656
For technical questions, please call 1-800-444-3353.
Page 4
Hide quick links:
Advertisement
Table of Contents
