Related Manuals for Fisher & Paykel OR90SCI1
Summarization of Contents
SAFETY AND WARNINGS
General Safety Precautions
Essential warnings for electrical safety, potential cuts, and appliance stability.
Important Safety Instructions
Key safety guidelines for installation and operation.
General Installation Information
Advice on cleaning, servicing, and handling the heavy appliance safely.
Replacement Parts Information
Information on using only authorized replacement parts for service.
PARTS SUPPLIED FOR INSTALLATION
Anti-tip Bracket and Lock Pin
Identifies the anti-tip bracket and lock pin supplied with the appliance.
Screws and Anchors
Identifies the screws and plastic sleeve anchors provided for installation.
TOOLS NEEDED FOR INSTALLATION
Essential Installation Tools
Lists the necessary tools required for installation, not included with the appliance.
MODEL IDENTIFICATION
OR90 Induction Models
Lists the specific model codes for OR90 Induction cookers.
PRIOR TO INSTALLATION
Unpacking and Handling
Instructions on inspecting the cooker for damage and removing protective film.
PRODUCT DIMENSIONS
Product Dimension Diagrams
Illustrations showing product dimensions from front, top, and side views.
Dimension Measurements Table
Table detailing specific product dimensions in mm for various parts.
CLEARANCE DIMENSIONS
Cabinet and Benchtop Clearances
Specifies minimum vertical and horizontal clearances for surrounding cabinets.
Overhead and Hood Clearances
Details required clearances above the cooktop for overhead cabinets and hoods.
Cabinetry Opening and Depth Requirements
Defines required width of cabinetry opening and maximum depth from wall.
Cabinetry Heat Resistance Requirement
Note on cabinetry needing to withstand high temperatures for safety.
FITTING THE OPTIONAL BACKGUARD
Backguard Installation Procedure
Instructions for attaching the optional backguard using screws and spacers.
LOCATION OF ELECTRICAL SUPPLY
Electrical Supply Area Dimensions
Specifies dimensions and location for the electrical supply connection point.
VENTILATION REQUIREMENTS
Ventilation Hood Installation Guidelines
Guidelines for installing a ventilation hood above the cooker.
Hood Blower Speed Recommendations
Recommendations for variable blower speeds and when maximum speed is needed.
FITTING THE ADJUSTABLE FEET
Attaching Adjustable Feet to Cooker
Steps for fitting the adjustable feet to the base of the cooker.
Levelling the Cooker with Feet
Instructions on how to level the cooker using the adjustable feet.
Optional Feet Cover Installation
Guidance on fitting optional decorative covers for the adjustable feet.
MOVING THE COOKER
Safe Cooker Handling and Lifting
Precautions for moving and lifting the cooker safely, advising against dragging.
INSTALLING THE ANTI-TIP BRACKET
Anti-Tip Bracket Mounting Procedure
Detailed steps for securely attaching the anti-tip bracket to the wall.
Bracket Positioning and Height
Specifies required measurements for anti-tip bracket positioning relative to the cooker.
INSTALLING THE ANTI-TIP BRACKET
Fitting Lock Pin (Storage/Warmer Drawer Models)
Instructions for fitting the lock pin for models with a storage/warmer drawer.
Fitting Lock Pin (Storage Compartment Models)
Instructions for fitting the lock pin for models with a storage compartment.
ELECTRICAL CONNECTION
Qualified Electrician Requirement
Emphasizes that connection must be done by a qualified person, checking system suitability.
Wiring, Switch, and Cable Safety
Details on disconnection switch, air gap, and power supply cable positioning.
Model Power Specifications
Table listing model codes with power, voltage, and current ratings.
ELECTRICAL FEEDER CABLE CONNECTION
Feeder Cable Section Specification
Specifies the required feeder cable section based on local regulations.
Feeder Cable Connection Steps
Step-by-step guide for connecting the feeder cable to the cooker terminals.
FINAL CHECKLIST
General Installation Checks
Items to check for general installation aspects like placement and clearances.
Electrical Connection Checks
Items to verify regarding electrical connection and grounding.
Operation Checks
Items to check for proper operation of controls, displays, and doors.
Installation Details Record
Section to record essential installation and ownership details for future reference.
Need help?
Do you have a question about the OR90SCI1 and is the answer not in the manual?
Questions and answers