Table of Contents
Advertisement
Description
iH80
iH160
iH160HTX
iH600
iH1000
iH1800
iH1800HTX
iH1800NRV
iH1800NRV HTX
Where xxx is as follows:
460 V, 60 Hz, 3 phase
200/208 V, 50/60 Hz, 3 phase
380/415 V, 50 Hz, 3 phase
230 V, 60 Hz, 3 phase
Instruction Manual
iH Dry Pumping Systems
Item Number
A590-00-xxx
A590-10-xxx
A590-12-xxx
A590-20-xxx
A590-30-xxx
A590-40-xxx
A590-42-xxx
A590-50-xxx
A590-52-xxx
908
945
946
957
A590-00-880
Issue D Original
Advertisement
Table of Contents
Related Manuals for Edwards iH1000
Summarization of Contents
Introduction
Scope and definitions
Manual covers installation, operation, and maintenance of iH dry pumping systems.
Applications
Details suitable and recommended applications for the iH system based on process types.
Description
Describes the iH HTX and iH NRV system types and their features.
Technical data
General technical data
Provides physical dimensions, mass, noise, vibration, and electrical data for iH80/600/1000.
Electrical data
Details electrical supply requirements and ratings for various iH models and voltage/frequency configurations.
Loading
Shows centre of gravity and levelling foot load data for different iH pump models.
Connections
Describes the mating connector types and external/internal supply ratings for iH system connections.
Installation
Locate the dry pumping system
Provides instructions for positioning and securing the iH system in its operating location.
Connect the dry pumping system to your vacuum/exhaust system
Guides connecting the iH system inlet/outlet to vacuum and exhaust systems safely.
Connect the nitrogen supply
Instructions for connecting the nitrogen supply, including safety for flammable/pyrophoric materials.
Electrical supply
Covers connecting the system to the electrical supply and safety precautions.
Reconfigure the iH system for your electrical supply (if necessary)
Explains how to reconfigure the iH system for different voltage and frequency supplies.
Commission the system
Steps to follow for system commissioning and initial checks.
Operation
Start-up
Step-by-step guide for starting up the iH system safely.
Manual shut-down
Procedures for safely shutting down the iH system manually.
Automatic shut-down
Explains automatic shutdown conditions and the 'run til crash' option.
Unplanned shutdown and alarms
Details safety sensors, warnings, and alarm conditions for the iH system.
Emergency stop
Instructions on using the emergency stop switch and its function.
Maintenance
Safety and maintenance frequency
Outlines safety precautions and frequency for maintenance tasks.
General maintenance
Lists general maintenance tasks like flow checks and oil level checks.
Replace a fuse
Step-by-step guide to replacing low voltage fuses in the electrics box.
Transportation, storage and disposal
Transportation
Safety warnings and procedures for transporting the iH system.
Storage
Guidelines for storing the iH system safely and correctly.
Disposal
Safety and environmental requirements for disposing of the iH system.
Service, spares and accessories
Service
Describes available service options from Edwards Service Centres.
Ordering accessories
Lists accessories and their item numbers.
Need help?
Do you have a question about the iH1000 and is the answer not in the manual?
Questions and answers