Olympus VP-1 - Data Projector - DLP User Manual page 32
Vp-1 user's manual - simplified edition (english)
Hide thumbs
Also See for VP-1 - Data Projector - DLP:
- User manual (72 pages) ,
- Quick reference manual (1 page)
Table of Contents
Advertisement
When the STATUS Indicator is Lit/Blinks
STATUS Indicator
STATUS
Blinks red
(0.5 s lit / 0.5 s off)
STATUS
Blinks red
(1 s lit / 1 s off)
STATUS
Lit red
STATUS
Lit red
Note
Should the projector not project properly, see "Troubleshooting" on Page E-33, 34(S).
POWER Indicator
POWER
Lit amber
POWER
Lit red
POWER
When power is on:
Lit green
When power is off:
Lit amber
POWER
Lit amber after 90 seconds
of blinking in amber
Action to Take
The fan is stopped.
Unplug the power cable and request service from
Olympus Digital Technical Support.
The lamp cover is open.
The lamp cover is not attached properly.
Attach it properly.
It is timer to replace the lamp.
The lamp timer has exceeded 1000 hours.
Replace the lamp cartridge.
The lamp's service life has ended.
The lamp timer has exceeded 1100 hours. The lamp
will not light. Replace the lamp cartridge.
E-32
Advertisement
Table of Contents
Need help?
Do you have a question about the VP-1 - Data Projector - DLP and is the answer not in the manual?