Olympus VP-1 - Data Projector - DLP User Manual page 16

Operating
1
Set up the screen and the projector
See "Projection Distance Table" on Page E- 11(S) for the distance between the screen and the
projector.
2
Connect the personal computer or video equipment to the projector
3
Connect the AC IN connector of the pro-
jector and the power outlet using the
supplied power cable.
The POWER indicator will light amber, the cool-
ing fan will rotate at low speed, and the unit will
enter the standby mode.
To wall outlet
4
Turning on the projector power
Main unit operation: Press and hold the POWER
button for 1 second.
Remote control operation: Press the POWER
ON button.
ON
The POWER indicator changes to a blinking green and lights steadily after about 60 seconds.
The projection screen brightens after about 40 seconds.
The projector is now capable of regular projection.
5
Switch on the power of the connected equipment
6
Select the input
Main unit operation: Press the SOURCE button.
Remote control operation: Press the desired button from among the input selection buttons.
Firmly plug in all the way.
POWER OFF
STATUS POWER
POWER
E-16
A U
D I O
V I D
E O
P C
STATUS POWER STATUS POWER
Blinks green
Lit green
(Approximately
Power is on
60 seconds)