Related Manuals for AUSTRALIAN MONITOR HS2120P
Summarization of Contents
CONTROLS, CONNECTORS & INDICATORS
FRONT PANEL
Details of front panel controls, LED indicators, and power switch for the amplifier.
CONTROLS, CONNECTORS & INDICATORS
REAR PANEL
Details of rear panel connectors, speaker outputs, and communication ports.
SOFTWARE SETUP
Supported Operating Systems
Lists the operating systems compatible with the HSP Control Software.
Software Download Procedure
Steps to download and install the HSP Control Software from the manufacturer's website.
Software Control Over USB
Instructions for connecting and controlling the amplifier via USB using the PC software.
Software Control Over RS232
Details on using the RS232 interface for control, either via PC application or external systems.
SOFTWARE SETUP (CONT)
RS232 using the PC application
Step-by-step guide for connecting the amplifier to a PC using an RS232 to USB converter.
RS232 using an external control system
Instructions for integrating the amplifier with external control systems via RS232.
SOFTWARE SETUP (CONT)
Software Developer Mode
Enabling developer mode in the PC application to view sent and received commands.
SOFTWARE SETUP (CONT)
External Mute
How to use the external mute functionality via a 4-way Phoenix connector.
Standby
Explains the three priority methods for entering and exiting standby mode.
Password Protection
Steps to enable and use password protection for the amplifier's settings.
SOFTWARE SETUP (CONT)
Fault
Details on the FAULT output signal, its conditions, and connection for monitoring.
INSTALLATION
Power Requirements
Information on power consumption and mains voltage requirements for HSP series amplifiers.
Mounting
Guidelines for mounting the HSP series amplifiers in standard racks or on shelves.
Cooling
Explanation of cooling systems and airflow requirements for proper amplifier operation.
Balanced Input Wiring
Instructions for correctly wiring balanced audio inputs to the amplifier.
Output Wiring
Recommendations for selecting appropriate speaker wire gauge and type.
INSTALLATION (CONT)
Speaker Outputs
Configuration options for speaker outputs, including 4/8 Ohm, 70V, and 100V line outputs.
INSTALLATION (CONT)
Hum Problems
Discusses common causes of hum (earth loops, radiation) and methods to avoid them.
Powering Up
Correct procedure for powering up the amplifier and the audio system.
Sensitivity
Specifies input sensitivity, impedance, and signal source requirements.
BASIC SETUP & OPERATION
Fault Finding
Explains status LED indicators, error codes, and troubleshooting steps for amplifier faults.
Protect Indicator
Meaning of protection mode indicators (yellow/red LEDs) and resolution steps.
Signal Indicator
Interpreting signal LED indicators for audio signal presence and mute status.
MAINTENANCE & FIRE REGULATION COMPLIANCE
Maintenance
Guidance on servicing and maintenance, recommending qualified personnel and annual inspection.
Fire Regulation Compliance
Statement regarding the amplifier's certification for fire regulations standards.
SERIAL COMMAND PROTOCOL
Serial Command Message Format
Defines the structure and syntax for serial commands sent to the amplifier.
Example Commands
Illustrative examples of serial commands for various operations like setting volume and mode.
Need help?
Do you have a question about the HS2120P and is the answer not in the manual?
Questions and answers