Related Manuals for AUSTRALIAN MONITOR HS2250P
Summarization of Contents
Features and Protection Features
Amplifier Features
Comprehensive list of the amplifier's functionalities and design aspects.
Protection Features
Explains the safety measures implemented to protect the amplifier.
Controls, Connectors & Indicators
Front Panel Controls and Indicators
Details the components and functions of the amplifier's front interface.
Controls, Connectors & Indicators (Rear Panel)
Rear Panel Connections
Details rear panel connectivity including power, speaker outputs, and communication ports.
Controls, Connectors & Indicators (Input/Grounding)
Input Signal Attenuation and Ground Lift
Explains input attenuation adjustment and grounding options for audio signals.
Software Setup
Software Control and Connectivity
Covers software download, USB/RS232 control, and connection setup.
Software Setup (RS232)
RS232 Configuration Details
Details RS232 configuration for PC applications and external systems.
Software Setup (Developer Mode)
Developer Mode for Command Monitoring
Explains developer mode for command monitoring and troubleshooting.
Software Setup (Standby & Security)
External Mute, Standby, and Security Features
Explains external mute, standby modes, and password protection.
Software Setup (Standby & Faults)
Standby Modes and Fault Output Signals
Details standby modes and fault output signals.
Installation Guide
Power, Mounting, and Cooling Requirements
Guidance on power requirements, mounting, and cooling for the amplifiers.
Balanced Input Wiring Instructions
Instructions for connecting balanced audio sources to the amplifier inputs.
Installation Guide (Speaker Outputs)
Speaker Output Configurations
Details speaker output configurations for different impedance and voltage settings.
Installation Guide (Hum & Power Up)
Hum Problems and Powering Up Procedures
Addresses common hum issues and outlines the correct procedure for powering the amplifier.
Basic Setup and Operation
Fault Finding and Status Indicators
Explains how to diagnose issues using status LEDs and error codes.
Maintenance and Compliance
Maintenance and Servicing Guidelines
Guidelines for amplifier maintenance and servicing by qualified personnel.
Serial Command Protocol
Serial Command Message Format
Defines the structure and syntax for sending commands to the amplifier.
Serial Command Protocol (Device/Config/Mode)
Device Version, Configuration, and Mode Commands
Details command parameters for device version, configuration, and mode settings.
Serial Command Protocol (Preset/Security/Input)
Preset, Security, and Input Commands
Details commands for preset management, security, and input processing.
Serial Command Protocol (Output/Filter/Volume)
Output, Filter, and Volume Control Commands
Details commands for output configuration, filters, and volume control.
Serial Command Protocol (Compressor/Status)
Compressor and Status Monitoring Commands
Details commands for compressor settings and amplifier status monitoring.
Need help?
Do you have a question about the HS2250P and is the answer not in the manual?
Questions and answers