Using The Control Panel - Dell 1420X User Manual

Using the Control Panel

1
12
11
1
Power
2
IR Receiver
3
LAMP warning light
20 Using Your Projector
2 3 4
10 9
Turns the projector on or off. For more
information, see "Turning Your Projector On" on
page 15 and "Turning Your Projector Off" on
page 15.
Point the remote control towards the IR receiver
and press a button.
If the LAMP amber indicator is on or blinking,
one of the following problems could be occurring:
• Lamp is reaching its end of usable life
• Lamp module is not properly installed
• Lamp driver failure
• Color wheel failure
For more information, see "Troubleshooting Your
Projector" on page 44 and "Guiding Signals" on
page 48.
5
6
7
8