Adjusting The Projected Image; Raising The Projector Height; Lowering The Projector Height - Dell 1420X User Manual

To power off the projector quickly, press the Power button and hold for 1 second
3
while the projector's cooling fans are still running.
NOTE:
Before you turn on the projector again, wait for 60 seconds to allow the
internal temperature to stabilize.
Disconnect the power cord from the electrical outlet and the projector.
4

Adjusting the Projected Image

Raising the Projector Height

Raise the projector to the desired display angle and press the quick-release button.
1
Use the tilt adjustment wheel to fine-tune the display angle.
2

Lowering the Projector Height

Hold up the projector while pressing the quick-release button, then slowly lower
1
the projector and use the tilt adjustment wheel to fine-tune the display angle.
2
1
Front adjuster foot
(Angle of tilt: 0 to 6 degrees)
2
Tilt adjustment wheel
16 Using Your Projector
PUSH
PUSH
1
1