ZENEC ZE-MR1020-DVD Instruction Manual page 42

playing audio cD's
to display playing time and the current track:
During CD playback, press the DiSpLAy button to display the disc type, the current time,
the current track number and the total number of the tracks are displayed on the screen.
repeat part or the entire cD
During playback, press the REPEAT button repeatedly to cycle through the available set-
tings:
■ title: Repeats the current track.
■ All: Repeats the entire CD.
■ off: Resume normal playback.
to repeat a custom segment:
1. During playback, press the A-b button to set the starting point "A".
2. Press the A-b button again to set the ending point "B". The player plays the segment
between point A and point B repeatedly.
3. To cancel the repeat playback and resume normal playback, press the A-b button
again.
SD/mmc/mS or uSb mode
■ Press the Scr button for 2 seconds when you are in the DVD-mode to reach the SD/
MMS/NS or USB mode.
■ The operation of the SD/MMS/NS or USB mode is the same like the operation of the
DISC mode.

notE:
■ You can just plug in one medium. When you plug in both, the unit will find no medium.
42