ZENEC ZE-MR1020-DVD Instruction Manual page 41

using repeat playback
To repeat a chapter, a title, or both:
During playback, press the REPEAT button repeatedly to cycle through the available
settings:
■ chapter: Repeats the current chapter.
■ title: Repeats the current title.
■ All: Repeats all chapters and titles.
■ off: Resumes normal playback.
to repeat a custom segment:
1. During playback, press the A-b button to set the starting point "A".
2. Press the A-b button again to set the ending point "B". The player plays the segment
between point A and point B repeatedly.
3. To cancel the repeat playback and resume normal playback, press the A-b button
again.
changing Viewing Angle during playback (multi-Angle):
To change viewing angle:
1. Press the AngLE button to cycle through available viewing angles during DVD playback.
The current angle number and the total number of angles available appear on the
screen.
2. Press the AngLE button again to select a different angle, then press it again to exit and
return to the normal viewing angle. The angle display disappears automatically if the
AngLE button is not pressed again within 3 seconds.

notE:
■ Viewing angles are available for a DVD if the back of the DVD case contains a multiple
angles icon.
using zoom
To zoom the image:
■ During disc playback, press zoom to switch through the available zoom settings.
(2x, 3x, 4x, 1/2x, 1/3x, 1/4x and normal)

notE:
■ While viewing JPG/JPEG images on a disc, press zoom, then press FF or Fr to switch
the zoom settings.
41
ENGLISH
ENGL I SH