Basic Operation; Selecting The Input Source - ZENEC ZE-MR1020-DVD Instruction Manual

BASIC OPERATION

turning on thE pLAyEr
Press the button on the remote control or on the front panel. The player turns on, and
the input source and format are displayed on the screen:
DVD-in
ntSc

notE:
1. The default is DVD-IN.
2. If the message "NO DISC" is displayed on the screen, insert disc media or press Src
button to change input source.

SELEcting thE input SourcE

1 During Power ON, press the Src button to switch from one mode to another.
2. The operating modes changes in the following order:
DVD-in > AV 1 > AV 2 > DVD-in...
■ Press the Scr button for 2 seconds when you are in DVD-mode to reach the SD/MMC/
MS or USB mode.

notE:
■ You can plug in only one medium. When you plug in both, the unit will find no medium.
turning oFF thE pLAyEr
Press the button again, the unit will be turned off.
* If there is a disc media in player, it will continue playback from the last position.
pLAying A DiSc
1. If the input source isn't already set to DVD-IN, press Src button to change the input
source to DVD-IN.
2. Insert a disc to DVD into the disc slot on the right side of the player. After several
seconds, the screen displays the message „loading".
3. Press the pLAy/pAuSE button or the EntEr button.
■ To stop playback, press the Stop button.
■ To play the previous track or chapter, press the prEViouS button.
■ To play the next track or chapter, press the nEXt button.
■ To pause or resume playback, press the pLAy/pAuSE button.
4. Press the EJEct button to eject the disc from the player.
5. Press the powEr button to turn off the player.
mutE on or oFF
1. Press the mutE button to mute the sound during disc playback.
2. Press the mutE button again to activate the sound.
Input source name.
The system of the input source
detected automatically.
39
ENGLISH
ENGL I SH