Advertisement
Quick Links
FIBARO DOOR/WINDOW SENSOR 2
CONTENTS
#1: Description and features
#2: Basic activation
#3: Adding/removing the device
#4: Physical installation
#5: Operating the device
O P E R A T I N G
M A N U A L
FGDW-002
3
#6: Association
4
#7: Advanced parameters
5
#8: Specifications
6
#9: Regulations
7
EN
v1.0
9
10
14
15
Advertisement
Related Manuals for FIBARO DOOR/WINDOW SENSOR 2
Summarization of Contents
Adding and Removing the Device
Adding (Inclusion)
Z-Wave device learning mode to add the device to an existing Z-Wave network. Follow specific steps for inclusion.
Removing (Exclusion)
Z-Wave device learning mode to remove the device from an existing Z-Wave network. Follow specific steps for exclusion.
Operating the Device
Tamper (TMP) Button Functionality
Details the function of the two tamper buttons and their role in detecting opening or detachment.
Control via FIBARO Home Center
Explains how the sensor is represented and controlled within the FIBARO Home Center interface.
Waking Up the Sensor
Describes the manual process of waking up the sensor to receive configuration updates.
Advanced Parameters
Wake Up Interval
Configures the interval at which the sensor wakes up to communicate with the controller, affecting battery life.
Door/Window State Parameter
Parameter to define the state of the door/window when the magnet is near the sensor.
Visual LED Indications Parameter
Defines events indicated by the visual LED, which can be disabled to extend battery life.
Z-Wave Security Mode Association Parameter
Defines how commands are sent in association groups as secure or non-secure, active in Z-Wave Security Mode.
2nd Association Group Triggers Parameter
Defines events that trigger on/off commands to devices in the 2nd association group.
Association Value Sent on Opening Parameter
Sets the value sent to the 2nd association group when the door/window opening is detected.
Association Value Sent on Closing Parameter
Sets the value sent to the 2nd association group when the door/window closing is detected.
Association Opening Time Delay Parameter
Sets the time delay from opening before sending a command frame to devices in the 2nd association group.
Association Closing Time Delay Parameter
Sets the time delay from closing before sending a command frame to devices in the 2nd association group.
Tamper Alarm Cancellation Delay Parameter
Defines the time period after which a tamper alarm will be cancelled.
Tamper Alarm Cancellation Reporting Parameter
Controls whether tamper alarm cancellation is reported to the controller and 3rd association group.
Temperature Measurement Interval Parameter
Defines how often the temperature is measured, impacting battery life.
Temperature Report Threshold Parameter
Sets the temperature change threshold for sending a report to the main controller.
Temperature Report Interval Parameter
Determines how often temperature reports are sent to the main controller.
Temperature Offset Parameter
Allows adding a value to the measured temperature for compensation.
Temperature Alarm Reports Parameter
Configures reporting of temperature alarms (high, low, or both) to the Z-Wave controller.
High Temperature Alarm Threshold Parameter
Sets the threshold for high temperature alarms and triggering overheat notifications or scenes.
Low Temperature Alarm Threshold Parameter
Sets the threshold for low temperature alarms and triggering underheat notifications or scenes.
Regulations
FCC Compliance
Details compliance with Part 15 of the FCC Rules for operation and interference.
Industry Canada (IC) Compliance
Outlines compliance with Industry Canada license-exempt RSS standards and conditions.
Legal Notices
Information regarding product specifications, functionality, and Fibaro's rights to change them.
Need help?
Do you have a question about the DOOR/WINDOW SENSOR 2 and is the answer not in the manual?
Questions and answers