Related Manuals for ESAB Origo TA33
Summarization of Contents
Safety
Personal safety equipment
Wear recommended safety equipment like glasses, flame-proof clothing, and gloves.
General precautions
Ensure secure return cable, qualified electricians for high voltage, and fire extinguishing equipment.
Hazard Warnings and Precautions
Comprehensive safety warnings regarding electric shock, fumes, arc rays, fire, noise, and operational advice.
Introduction
Equipment
Details that the Tig 150i/Tig 200i includes a mains cable and manual.
Installation
Placing
Position the power source to ensure unobstructed air inlets and outlets.
Rating plate
The rating plate is located on the underside or rear of the power source.
Mains power supply
Ensure correct supply voltage, fuse rating, and protective earth connection.
Recommended fuse sizes and minimum cable areas
Details recommended fuse sizes and minimum cable areas for mains power connections.
Operation
Connections and control devices
Identifies and explains the purpose of various connection ports and control devices on the unit.
Control panel TA33
Details the functions of the control panel, including LEDs, display, and setting knob.
Overheating protection
Describes the thermal overload trip that protects the unit from overheating.
Welding
TIG welding
Explains TIG welding polarity and arc striking methods like 2-stroke, 4-stroke, HF, and LiftArc.
Gas post-flow
Controls the duration of shielding gas flow after the arc is extinguished.
Slope down
Gradually reduces current to prevent craters and cracks at the end of a weld.
Current settings
Explains how higher current affects weld pool and penetration, and how to adjust it.
MMA welding
MMA welding electrode compatibility
Details compatible coated electrode sizes for Tig 150i and Tig 200i.
MMA welding arc striking
Provides instructions on how to strike the arc correctly for MMA welding.
Fault Tracing
Troubleshooting common faults
Provides checks for common issues like no arc, frequent thermal overload, and poor performance.
Fault codes
Explains that fault codes are displayed for built-in monitoring and advises on seeking service.
Need help?
Do you have a question about the Origo TA33 and is the answer not in the manual?
Questions and answers