McAfee VIRUSSCAN 5.1 User Manual page 87

Depending on which combination of modules you enable, the VShield icon
will display a different state.
Method 3: Use the VShield Properties dialog box
Follow these steps:
1. Right-click the VShield icon
VShield shortcut menu, point to Properties, then choose System Scan
to open the VShield Properties dialog box.
Figure 4-2. VShield Properties dialog box
2. For each module that you want to enable, click the corresponding icon
along the left side of the dialog box, then click the Detection tab.
3. Select the Enable checkbox at the top of each page.
As you do so, the scanner enables that module. Depending on which
combination of modules you enable, the VShield icon displays a different
state.
If you enable all of its modules, the scanner will display
system tray, unless you clear the Show icon in the taskbar checkbox in the
System Scan Detection property page.
Using the VShield Scanner
in the Windows system tray to display the
in the Windows
User's Guide 87