McAfee VIRUSSCAN 5.1 User Manual page 152

Using the VShield Scanner
Method 3: Use the VirusScan control panel
Follow these steps:
1. Click Start in the Windows taskbar, point to Settings, then choose
2. Locate and double-click the VirusScan control panel
3. Click Stop in the Service page.
4. Click OK to close the control panel.
Disabling the VShield scanner and its modules
You can use any of three methods to disable any of the VShield modules—that
is, deactivate the module, but do not remove the scanner from memory—in
any of three ways. Once you disable a module, you can reactivate it in much
the same way you disabled it.
152 McAfee VirusScan
Control Panel.
(Figure 4-43).
Figure 4-43. VirusScan control panel - Service page
All active VirusScan components will stop, close all open windows or
dialog boxes, remove their icons from the Windows system tray, and
unload from memory.
to open it