McAfee VIRUSSCAN 5.1 User Manual page 86

Using the VShield Scanner
Š NOTE: Enabling a module means activating it and loading it into your
Method 1: Use the VShield shortcut menu
Follow these steps:
1. Right-click the VShield icon
2. Point to Quick Enable.
3. Choose one of the module names shown without a check mark. Module
Depending on which combination of modules you enable, the VShield icon
will display a different state.
Method 2: Use the System Scan Status dialog box
Follow these steps:
1. Double-click the VShield icon
2. For each module that you want to enable, click the corresponding tab,
3. Click Close to close the dialog box.
86 McAfee VirusScan
computer's memory for use. The VShield scanner can start and remain
active in memory even with none of its modules enabled.
shortcut menu.
names that have a check mark beside them are active. Those without a
check mark are inactive. If you use this method to enable a module, it
remains enabled until you restart your VirusScan software or your
computer. At that point, its state will depend on whether you have
enabled or disabled the module in the VirusScan Properties dialog box.
System Scan Status dialog box
Figure 4-1. System Scan Status dialog box
then click Enable. The same button in the property page for active
modules will read Disable.
in the Windows system tray to display its
in the Windows system tray to open the
(Figure 4-1).