McAfee VIRUSSCAN 5.1 User Manual page 153

Method 1: Use the VShield shortcut menu
Follow these steps:
1. Right-click the VShield icon
shortcut menu.
2. Point to Quick Enable.
3. Choose one of the module names shown with a check mark beside it to
deactivate it. Module names that have a check mark beside them are
active. Those without a check mark are inactive. This method disables a
module only for the length of a scan session, or until you enable it again.
The module will start again when you restart your computer.
Depending on which combination of modules you enable, the VShield
icon will display a different state.
Method 2: Use the System Scan Status dialog box
Follow these steps:
1. Double-click the VShield icon
System Scan Status dialog box
Figure 4-44. VShield System Scan Status dialog box
2. For each module that you want to disable, click the corresponding tab,
then click Disable. The same button in the property page for inactive
modules will read Enable.
3. Click Close to close the dialog box.
Depending on which combination of modules you enable, the VShield
icon will display a different state.
Using the VShield Scanner
in the Windows system tray to display its
in the Windows system tray to open the
(Figure 4-44).
User's Guide 153