McAfee VIRUSSCAN 5.1 User Manual page 168

Using the VirusScan application
3. Click the Report tab to choose additional VirusScan options.
Choosing Report options
By default, the VirusScan application beeps to alert you when it finds a virus.
You can use the Report page to enable or disable this alert, or to add an alert
message to the Virus Found dialog box that appears when the application
finds an infected file. This alert message can contain any information, from a
simple warning to instructions about how to report the incident to a network
administrator.
You can also set the size and location of the VirusScan log file here. By default,
the application lists its current settings and summarizes all of the actions it
takes during its scanning operations in a log file called VSCLOG.TXT. You can
keep this file as your log file, or you can specify a different existing text file for
the application to use. The application will not create a new text file itself.
You can then open and print the log file for later review from within the
VirusScan application or from a text editor.
To choose VirusScan alert and log options, follow these steps:
1. Click the Report tab in the VirusScan Classic window to display the
2. Choose the types of alert methods you want the VirusScan application to
168 McAfee VirusScan
To start a scan operation immediately with just the options you've
chosen, click Scan Now. To save your changes as default scan options,
choose Save As Default from the File menu or click New Scan. To save
your settings in a new file, choose Save Settings from the File menu,
name your file in the dialog box that appears, then click Save.
correct property page (Figure 5-6).
Figure 5-8. VirusScan Classic window - Report page
use when it finds a virus. You can have it:
• Display a custom message. Select the Display message checkbox,
then enter the message you want to appear in the text box provided.
You can enter a message up to 225 characters in length.