Setting The Length Of Copy Paper Cut - Ricoh Aficio MP W3600 Operating Instructions Manual

Copying

Setting the Length of Copy Paper Cut

Specify the length to cut the paper loaded in the paper roll tray.
The following paper cut methods are available:
❖ Synchro Cut
Cuts the paper at the same length as the original. If the copy is enlarged or reduced, the
2
machine calculates the appropriate length for the magnification ratio and cuts the paper.
❖ Preset Cut
Cuts the paper at a preset size, regardless of the size of the original. You can
use this to copy different sized originals to the same size.
❖ Variable Cut
Cuts the paper to the size entered.
Note
❒ The minimum cut length is 280 mm (11"), and the maximum length is 15000 mm
(590.5") for plain paper of 841 mm (34" or 36") or more in width. For other paper, the
maximum length is 3600 mm (141.8"). If you specify a length greater than the maxi-
mum, paper will be fed in at a slant, resulting in poor copy quality and wrinkled paper.
❒ You cannot cut the paper in the bypass tray.
Reference
p.3 "Functions Requiring Optional Configurations"
Synchro Cut
Cuts the paper at the same length as the original. If the copy is enlarged or re-
duced, the machine calculates the appropriate length for the magnification ratio
and cuts the paper.
A
Select [Synchro Cut].
B
Select a paper roll tray.
Note
❒ Depending on the original length and paper type, copy paper length may
be different from the original.
56